液氢车辆燃料加注系统接口 GBT 30719-2014.pdf

GB/T30719-2014/1S013984:1999前言本标准按照GB/T1.1一2009给出的规则起草。本标准使用翻译法等同采用IS013984:1999液氢车辆燃料加注系统接口。本标准由全国氢能标准化技术委员会(SAC/TC309)提出并归口。本标准起草单位：同济大学、中国标准化研究院、上海舜华新能源系统有限公司、清华大学、浙江大学。本标准主要起草人：马建新、潘相敏、王表、刘绍军、李燕、王城、徐平、欧可升。GB/T30719-2014/1S013984:1999液氢车辆燃料加注系统接口1范围本标准规定了所有类型液氢车辆的燃料供给和加注系统的要求。本标准适用于液氢(LH,)燃料供给和加注系统的设计和安装。2规范性引用文件下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。1S01106-3熔焊接头射线检验推荐实施方法第3部分：壁厚50mm钢管的熔焊环接头(Recommended practice for radiographic examination of fusion welded joints-Part 3:Fusion weldedcircumferential joints in steel pipes of up to 50 mm wall thickness.)ISO1182建筑材料的阻燃防火测试不燃测试(Reaction to fire tests for building products一Non-combustibility test)ISO9303无缝和焊接（埋弧焊除外）钢制压力管道纵向缺陷的全周向超声检测Seamless andwelded(except submerged are-welded)steel tubes for pressure purposes-Full peripheral ultrasonictesting for the detection of longitudinal imperfectionsISO10286气瓶术语(Gas cylinders-一Terminology)ISO11484钢制压力管道无损检测(NDT)人员的资格和认证Steel tubes for pressure purpo-ses-Qualification and certification of non-destructive testing(NDT)personnelISO12095无缝和焊接钢制压力管道液体渗透检测(Seamless and welded steel tubes for pres-sure purposes-Liquid penetrant testing)ISO13663焊接钢制压力管道焊缝周围分层缺陷探测用超声检测(Welded steel tubes for pres-sure purposes-Ultrasonic testing of the area adjacent to the weld seam for the detection of laminarimperfections)ISO13664无缝和焊接钢制压力管道管瑞分层组织探测用磁粉检测(Seamless and weldedsteel tubes for pressure purposes-Magnetic particle inspection of the tube ends for the detection oflaminar imperfections)ISO13665无缝和焊接钢制压力管道管身表面缺陷探测用磁粉检测(Seamless and weldedsteel tubes for pressure purposes-Magnetic particle inspection of the tube body for the detection ofsurface imperfections)ASTM A240/A240M-97a压力容器用耐热铬及铬镍不锈钢板、薄板和钢带(Heat-resisting chro-mium and chromium-nickel stainless steel plate,sheet,and strip for pressure vessels)3术语和定义1S010286界定的以及下列术语和定义适用于本文件。1