气动阀 商务文件中应包含的资料 GBT 32807-2016.pdf

GB/T32807-2016/1S017082:2004气动阀商务文件中应包含的资料1范围本标准规定了制造商在随同各类气动阀的商务文件中应包含的资料。这些资料对于选用合适的气动阀是必不可少的。2规范性引用文件下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。ISO1219-1流体传动系统及元件图形符号和回路图第1部分：图形符号(Fluid powrsystems and components-Graphic symbols and circuit diagrams-Part 1:Graphic symbols)ISO3448工业润滑油ISO黏度分类(Industrial liquid lubricants-一ISO viscosity classification)ISO4400流体传动系统及元件带接地触点的三脚电插头特性和要求(Fluid power systemsand components-Three-pin electrical plug connectors with earth contact-Characteristics and require-ments)ISO5598流体传动系统及元件词汇(Fluid power systems and components-一Vocabulary)ISO5599-1气动五气口方向控制阀第1部分：不带电气接头的安装面(Pneumatic fluid pow-er-Five-Port directional control valves-Part 1:Mounting interface surfaces without electrical con-nector)1SO5599-2气动五气口方向控制阀第2部分：带可选电气接头的安装面(Pneumatic fluidpower-Five-Port directional control valves-Part 2:Mounting interface surfaces with optional electri-cal connector)ISO6358使用可压缩流体元件的流量特性的测定(Pneumatic fluid power-一Components usingcompressible fluids-Determination of flow-rate characteristics)ISO6952流体传动系统和元件带接地触点的两脚电插头特性和要求(Fluid power systemsand components-Two-pin electrical plug connectors with earth contact-Characteristics and require-ments)ISO11727气动控制阀和其他元件气口和控制机构的标识(Pneumatic fluid power-一Identifica-tion of ports and control mechanisms of control valves and other components)ISO12238气动方向控制阀切换时间的测量(Pneumatic fluid power-一Directional controlvalves-Measurement of shifting time)ISO15217流体传动系统和元件带接地触点的16mm方形电插头特性和要求(F1 uid powersystems and components-16 mm square electrical connector with earth contact-Characteristics andrequirements)ISO15218气动二位三通电磁阀安装面(Pneumatic fluid power-一3/2 Solenoid valves-一Mounting interface surfaces)1S015407-1气动规格18mm和26mm的五通方向控制阀第1部分：不带电气接头的安装(Pneumatic fluid power-Five-Port directional control valves,sizes 18 mm and 26 mm-Part 1: