IEC_62403-2005.pdf

INTERNATIONAL STANDARD IEC62403 First edition2005-06 High density recording format on CD-R/RW disc systems HD-BURN format Reference number IEC 62403:2005(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editions The IEC is now publishing consolidated versions of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publications The on-line catalogue on the IEC web site(www.iec.ch/searchpub)enables you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as well as corrigenda.IEC Just Published This summary of recently issued publications(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need further assistance,please contact the Customer Service Centre:Email:custserviec.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.INTERNATIONAL STANDARD IEC62403 First edition2005-06 High density recording format on CD-R/RW disc systems HD-BURN format IEC 2005 Copyright-all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in writing from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.ch U For price,see current cataloguePRICE CODE Commission Electrotechnique InternationaleInternational Electrotechnical Commission LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 62403 IEC:2005(E)CONTENTS 1 Scope.6 2 Normative references.6 3 Terms and definitions.7 4 Convention and notations.8 4.1 Representation of numbers.8 4.2 Names.9 5 List of acronyms.9 6 General requirements.10 6.1 Environment.10 6.2 Unrecorded disc.11 6.3 Recorded disc.11 7 Mechanical and physical characteristics.11 7.1 Mechanical parameters.11 7.2 Optical parameters.11 7.3 Recording parameters.11 8 Disc format.11 8.1 Track format.11 8.2 Data frame format.13 8.3 ECC block format.13 8.4 Recording frames.13 8.5 Physical sectors.13 8.6 Sector number.13 8.7 Format of the inner area.13 8.8 Format of the user data area.22 8.9 Format of the lead-out area.22 9 File system.22 Annex A (normative)A standard disc.23 Annex B(normative)ATIP synchronization rule.29 Annex C(normative)General linking rules(ATIP).30 Figure 1 Track layout.12 Figure 2 Sector structure.12 Figure 3 PCA structure.13 Figure 4 Lead-in(PMD)data structure.14 Figure 5 Multi-session structure.14 Figure 6 Lead-in(PMD)data structure.15 Figure A.1 Read only optical pick up.23 Figure A.2 Recorder optical pick up.24 Figure A.3 Modulation amplitude and signal asymmetry.26 Figure A.4 General system diagram for jitter measurement.26 Figure A.5 Write strategy pulse.27 Figure A.6 Write strategy pulse for CD-RW disc.28 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.62403 IEC:2005(E)3 Figure B.1 ATIP synchronization rule.29 Figure C.1 Write start for general linking rules(ATIP).30 Figure C.2 Write stop for general linking rules(ATIP).30 Table 1 PMA padding data format.14 Table 2 TPMA structure-1.15 Table 3 TPMA structure-2.15 Table 4 TPMA structure-3.16 Table 5 Initial data of PMD lead-in of disc information.16 Table 6 Write type.17 Table 7 Link size.17 Table 8 PMD-1.18 Table 9 PMD-1 item detail.19 Table 10 PMD lead-in start address.19 Table 11 Media information.20 Table 12 Point field.20 Table 13 PMD-2.20 Table 14 PMD-3.21 Table 15 PMD-4.21 Table 16 PSI.21 Table 17 PMD lead-in start a