IEC_TR_62390-2005.pdf

TECHNICAL REPORT IEC TR 62390 First edition2005-01 Common automation device Profile guideline Reference number IEC/TR 62390:2005(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editions The IEC is now publishing consolidated versions of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publications The on-line catalogue on the IEC web site(www.iec.ch/searchpub)enables you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as well as corrigenda.IEC Just Published This summary of recently issued publications(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need further assistance,please contact the Customer Service Centre:Email:custserviec.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.TECHNICAL REPORT IECTR 62390 First edition2005-01 Common automation device Profile guideline PRICE CODE IEC 2005 Copyright-all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in writing from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.ch XB For price,see current catalogue LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 TR 62390 IEC:2005(E)CONTENTS FOREWORD.5 INTRODUCTION.7 1 Scope.9 2 Normative references.9 3 Definitions and abbreviations.10 3.1 Definitions.10 3.2 Abbreviations.13 4 Guideline Overview.13 5 Automation model and device profiles.14 5.1 ISO 15745.14 5.2 Typical automation configuration.15 5.3 Modular device structure.16 5.4 Interface model.18 6 Profile definition steps.18 6.1 Outline.18 6.2 First step:Scope,compatibility levels and device classification.20 6.3 Second step:Definition of device functions and their relations.24 6.4 Third step:Parameter list definition.24 6.5 Fourth step:Grouping of functions to functional elements.26 6.6 Fifth step:Device behaviour description.28 6.7 Sixth step(optional):Extensions of existing profiles.29 7 Profile templates.29 7.1 General.29 7.2 Profile template structure.29 8 Device models.33 8.1 Mapping of ISO device profile classes.33 8.2 Comparison of function block and object models.35 Annex A(informative)Roles of the device in the life cycle.36 Annex B(informative)Collection of parameter characteristics.37 Annex C(informative)Compatibility level details.39 Annex D(informative)Data type.40 Annex E(informative)Engineering unit.41 Annex F(informative)UML class diagram semantics.43 Annex G(informative)Device classification examples.44 Annex H(informative)Parameter list model.46 Annex I(informative)Function block model.47 Annex J(informative)Object model.55 Annex K(informative)Common profile and device identification information.61 Bibliography.64 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.TR 62390 IEC:2005(E)3 Figure 1 Profile documents and their profile writer.7 Figure 2 Profile development using ISO 15745-1.15 Figure 3 Typical automation application system.16 Figure 4 Modular view of the hardware and software structures of a device(example).17 Figure 5 Device structure class diagram(example).17 Figure 6 General interface model of a device.18 Figure 7 Profile definition steps.19 Figure 8 Relations between profiles and products.21 Figure 9 Levels of functional compatibility.21 Figure 10 Functional diagram of a power drive s