IEC_PAS_62326-20-2011.pdf

IEC/PAS 62326-20 Edition 1.0 2011-01 PUBLICLY AVAILABLE SPECIFICATION PRE-STANDARD Printed boards Part 20:Electronic circuit board for high-brightness LEDs IEC/PAS 62326-20:2011(E)colourinsideCopyrighted material licensed to BR Demo by Thomson Reuters(Scientific),Inc.,,downloaded on Nov-28-2014 by James Madison.No further reproduction or distribution is permitted.Uncontrolled when printed.THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC,Geneva,Switzerland All rights reserved.Unless otherwise specified,no part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in writing from either IEC or IECs member National Committee in the country of the requester.If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,please contact the address below or your local IEC member National Committee for further information.IEC Central Office 3,rue de Varemb CH-1211 Geneva 20 Switzerland Email:inmailiec.ch Web:www.iec.ch About the IEC The International Electrotechnical Commission(IEC)is the leading global organization that prepares and publishes International Standards for all electrical,electronic and related technologies.About IEC publications The technical content of IEC publications is kept under constant review by the IEC.Please make sure that you have the latest edition,a corrigenda or an amendment might have been published.Catalogue of IEC publications:www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria(reference number,text,technical committee,).It also gives information on projects,withdrawn and replaced publications.IEC Just Published:www.iec.ch/online_news/justpub Stay up to date on all new IEC publications.Just Published details twice a month all new publications released.Available on-line and also by email.Electropedia:www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French,with equivalent terms in additional languages.Also known as the International Electrotechnical Vocabulary online.Customer Service Centre:www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance,please visit the Customer Service Centre FAQ or contact us:Email:csciec.ch Tel.:+41 22 919 02 11 Fax:+41 22 919 03 00 Copyrighted material licensed to BR Demo by Thomson Reuters(Scientific),Inc.,,downloaded on Nov-28-2014 by James Madison.No further reproduction or distribution is permitted.Uncontrolled when printed.IEC/PAS 62326-20 Edition 1.0 2011-01 PUBLICLY AVAILABLE SPECIFICATION PRE-STANDARD Printed boards Part 20:Electronic circuit board for high-brightness LEDs INTERNATIONAL ELECTROTECHNICAL COMMISSION X ICS 31.180 PRICE CODE ISBN 978-2-88912-345-2 Registered trademark of the International Electrotechnical Commission colourinsideCopyrighted material licensed to BR Demo by Thomson Reuters(Scientific),Inc.,,downloaded on Nov-28-2014 by James Madison.No further reproduction or distribution is permitted.Uncontrolled when printed.2 PAS 62326-20 IEC:2011(E)CONTENTS FOREWORD.6 1 Scope.8 2 Terms and definitions.8 3 Classification and class of the ECB.8 4 Design rules and allowance.9 4.1 Panel and board sizes.9 4.1.1 Board size(for reference only).9 4.1.2 Allowance of dimensions.10 4.1.3 Perforation and slit.10 4.1.4 V-cut.11 4.2 Total board thickness.12 4.2.1 Total board thickness and its allowance.12 4.3 Holes.13 4.3.1 Insertion holes and vias.13 4.3.2 Datum hole.15 4.3.3 Assembly hole(a through-hole without wall plating).15 4.4 Conductor.15 4.4.1 Width of conductor pattern and its allowance.15 4.4.2 Distance between conductors and its allowance.16 4.4.3 Distance between conductor and board edge.17 4.4.4 Thickness of the insulating layer.17 4.5 Printed contact.18 4.5.1 Allowance of the distance between the centres of two adjacent printed contacts.18 4.5.2 Allowance of the terminal width of printed contacts.18 4.5.3 Shift of the centre of printed contacts on front and back sides of a board.18 4.6 Footprint.19 4.6.1 Allowance of the distance between the centers of two pads.19 4.6.2 Allowance of the width of a pad.19 4.6.3 Pad diameter and its allowance for BGA/CSP.20 4.7 Fiducial mark and the mark for component positioning.21 4.8 Interlayer connection.22 5 Quality.22 5.1 Gap between conductor and the wall of a component insertion hole or a via.22 5.2 Positional deviation between conductor layers of multilayer board.22 5.3 Minimum land width.22 5.4 Surface treatment.24 5.4.1 Gold plating for printed contact.24 5.4.2 Other surface treatment.24 5.5 Defects of solder resist.24 5.6 Symbol mark.26 5.7 Appearance.27 5.7.1 Conductor surface.27 5.7.2 Between conductors.27 6 Performance and test methods.33 Copyrighted material licensed to BR Demo by Thomson Reuters(Scientific),Inc.,,