IEC_PAS_62453-3-2006.pdf

PUBLICLY AVAILABLE SPECIFICATION IEC PAS 62453-3Pre-Standard First edition2006-05 Field Device Tool(FDT)interface specification Part 3:PROFIBUS communication Reference number IEC/PAS 62453-3:2006(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editions The IEC is now publishing consolidated versions of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publications The on-line catalogue on the IEC web site(www.iec.ch/searchpub)enables you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as well as corrigenda.IEC Just Published This summary of recently issued publications(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need further assistance,please contact the Customer Service Centre:Email:custserviec.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.PUBLICLY AVAILABLE SPECIFICATIONIEC PAS 62453-3Pre-Standard First edition2006-05 Field Device Tool(FDT)interface specification Part 3:PROFIBUS communication PRICE CODE IEC 2006 Copyright-all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in writing from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.ch X For price,see current catalogue Commission Electrotechnique InternationaleInternational Electrotechnical Commission LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 PAS 62453-3 IEC:2006 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references.7 3 General.7 3.1 PROFIBUS schema.7 3.1.1 Configuration.7 3.1.2 Channels.8 3.1.3 Parameterization.8 4 Provided data.8 4.1 Interface IDtmParameter.8 4.2 SingleDataAccess interfaces.9 5 Protocol specific usage of XML attributes.9 6 Bus category.11 7 Communication schema.12 7.1 DPV0 communication.12 7.2 DPV1 communication.18 8 ChannelParameterSchema.21 9 Topology scan schema.25 10 Master-bus parameter set.25 11 Slave bus parameter set.26 12 Module and channel data.27 13 ProfiSafe.31 13.1 Motivation.31 13.2 General parameter handling.31 13.3 ProfiSafe individual device parameter.32 14 GSD information.33 15 Profibus device identification.34 15.1 FDTProfibusIdentSchema.34 15.2 FDTProfibusScanIdentSchema.39 15.3 FDTProfibusDeviceTypeIdentSchema.43 16 General recommendations.45 BIBLIOGRAPHY.46 Figure 1 Example for IO data within telegramms.27 Figure 2 F-Parameter and individual device parameter.32 Figure 3 Data structure of ProfiSafe individual device parameters.33 Table 1 SingleDataAccessSchema attributes.9 Table 2 DPV0CommunicationSchema attributes.12 Table 3 DPV0CommunicationSchema elements.13 Table 4 Availability of services depending on master and connect status.15 Table 5 DPV1CommunicationSchema attributes and elements.18 Table 6 Mapping of DPV1 data types to FDT data types.21 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.PAS 62453-3 IEC:2006 3 Table 7 ChannelParameter attributes and elements.22 Table 8 Bus parameter set for master device.25 Table 9 Bus parameter set for slave device.26 Table 10 Signal channels within the data frame.28 Table 11 FDTProfibusIdentSchema attributes with Profibus DP specific mapping.34 Table 12 FDTProfibusIdentSchema attributes with Profibus I&M specific mapping.35 Table 13 FDTProfibusIdentSchema attributes with Profibus PA specific m