IEC_61076-4-111-2002.pdf

INTERNATIONALSTANDARDIEC61076-4-111QC 480301XX0012First edition2002-02Connectors for electronic equipment Part 4-111:Printed board connectors with assessed quality Detail specification for two-part power connectormodules,for printed boards and backplaneshaving early mating features,and having a basicgrid of 2,5 mm in accordance with IEC 60917-1Reference numberIEC 61076-4-111:2002(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numberingAs from 1 January 1997 all IEC publications are issued with a designation in the60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editionsThe IEC is now publishing consolidated versions of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,thebase publication incorporating amendment 1 and the base publication incorporatingamendments 1 and 2.Further information on IEC publicationsThe technical content of IEC publications is kept under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating tothis publication,including its validity,is available in the IEC Catalogue ofpublications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects under consideration and work in progress undertakenby the technical committee which has prepared this publication,as well as the listof publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publicationsThe on-line catalogue on the IEC web site(www.iec.ch/catlg-e.htm)enablesyou to search by a variety of criteria including text searches,technicalcommittees and date of publication.On-line information is also available onrecently issued publications,withdrawn and replaced publications,as well ascorrigenda.IEC Just PublishedThis summary of recently issued publications(www.iec.ch/JP.htm)is alsoavailable by email.Please contact the Customer Service Centre(see below)forfurther information.Customer Service CentreIf you have any questions regarding this publication or need further assistance,please contact the Customer Service Centre:Email:custserviec.chTel:+41 22 919 02 11Fax:+41 22 919 03 00LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.INTERNATIONALSTANDARDIEC61076-4-111QC 480301XX0012First edition2002-02Connectors for electronic equipment Part 4-111:Printed board connectors with assessed quality Detail specification for two-part power connectormodules,for printed boards and backplaneshaving early mating features,and having a basicgrid of 2,5 mm in accordance with IEC 60917-1 IEC 2002 Copyright-all rights reservedNo part of this publication may be reproduced or utilized in any form or by any means,electronic ormechanical,including photocopying and microfilm,without permission in writing from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.chVFor price,see current cataloguePRICE CODECommission Electrotechnique InternationaleInternational Electrotechnical Commission LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 61076-4-111 IEC:2002(E)2CONTENTSFOREWORD.1General data.71.1Recommended method of mounting.71.1.1Number of contacts.71.2Ratings and characteristics.71.3Normative references.81.4Marking.81.5IEC type designation.91.6 Ordering information.92Technical information.102.1Definitions.102.2Survey of styles and variants.102.3Information on application.102.3.1Complete connectors(pairs).102.3.2Fixed board connectors.102.3.3Free board connectors.102.4Contact arrangements.103Drawings and dimensions.113.1General.113.2 Isometric view and common features.113.2.1Common features.123.2.2Reference system.123.2.3Height dimensions.123.2.4Width dimensions.133.2.5Depth dimensions.133.3Mating information.143.3.1Electrical engagement length.143.3.2Perpendicular to engaging direction.143.3.3Inclination.153.4Fixed board connectors.163.4.1Dimensions.163.4.2Terminations.163.4.3Dimensions of contacts.173.5Free board connectors.173.5.1Dimension.173.5.2Terminations.183.5.3Dimensions of contacts.183.6Accessories.183.7Mounting information for fixed board connectors.183.7.1Hole pattern on backplane.183.8Mounting information for free board connectors.193.8.1Hole pattern on printed boards.193.9Gauges.203.9.1Sizing gauge and retention force gauge.20LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.61076-4-111 IEC:2002(E)3 34Characteristics.204.1Climatic category.204.2Electrical.214.2.1Creepage and clearance distances.214.2.2Voltage proof.214.2.3Current-carrying capacity.214.2.4Contact resistance.214.2.5Insulation resistance.224.3Mechanical.224.3.1Mechanical oper