IEC_61169-16-2006.pdf

INTERNATIONAL STANDARD IEC61169-16QC 222400 First edition2006-12 Radio-frequency connectors Part 16:Sectional specification RF coaxial connectors with inner diameter of outer conductor 7 mm(0,276 in)with screw coupling Characteristics impedance 50 (75)(type N)Reference number IEC 61169-16:2006(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editions The IEC is now publishing consolidated versions of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publications The on-line catalogue on the IEC web site(www.iec.ch/searchpub)enables you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as well as corrigenda.IEC Just Published This summary of recently issued publications(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need further assistance,please contact the Customer Service Centre:Email:custserviec.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.INTERNATIONAL STANDARD IEC61169-16QC 222400 First edition2006-12 Radio-frequency connectors Part 16:Sectional specification RF coaxial connectors with inner diameter of outer conductor 7 mm(0,276 in)with screw coupling Characteristics impedance 50 (75)(type N)IEC 2006 Copyright-all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in writing from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.ch V For price,see current cataloguePRICE CODE Commission Electrotechnique InternationaleInternational Electrotechnical Commission LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 61169-16 IEC:2006(E)CONTENTS FOREWORD.4 1 Scope.6 2 Normative references.6 3 IEC type designation.7 4 Interface dimensions.7 4.1 Dimensions General purpose connectors Grade 2.7 5 Mechanical gauges and standard test connectors.12 5.1 Mechanical gauges.12 5.2 Standard test connectors Grade 0.13 6 Overall dimensions.17 7 Quality assessment procedures.17 7.1 General.17 7.2 Ratings and characteristics.17 7.3 Test schedule and inspection requirements.20 7.4 Procedures.22 8 Instructions for preparation of detail specifications.22 8.1 General.22 8.2 Identification of the Detail specification.22 8.3 Identification of the component.23 8.4 Performance.23 8.5 Marking,ordering information and related matters.23 8.6 Selection of tests,test conditions and severities.23 8.7 Blank detail specification pro-forma for type N connector.24 Annex A(informative)Guidance information for interface dimensions of 75 characteristic impedance general purpose connectors.29 Figure 1 Connector with pin centre contact.8 Figure 2 Details of pin centre contact.8 Figure 3 Connector with socket centre contact.10 Figure 4 Details of socket centre contact.10 Figure 5 Gauge rings for outer contact of pin connector.12 Figure 6 Gauge and test pins for socket centre contact.13 Figure 7 Standard test connector with pin centre contact.14 Figure 8 Details of pin centre contact.14 Figure 9 Standard test connector with socket centre contact.16 Figure 10 Details of socket centre contact.16 Figure A.1 Details of pin centre contact.29 Table 1 Dimensions for connector with pin centre contact.9 Table 2 Dimensions for connector with socket centre contact.11 Table 3 Dimensions for test pins for socket centre contact.13 Table 4 Dimensions for standard test connector with p