IEC_61169-8-2007.pdf

INTERNATIONAL STANDARD IEC61169-8 QC 222400First edition2007-02Radio-frequency connectors Part 8:Sectional specification RF coaxial connectors with inner diameter of outer conductor 6,5 mm(0,256 in)with bayonet lock Characteristic impedance 50 (type BNC)Reference number IEC 61169-8:2007(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editions The IEC is now publishing consolidated versions of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publications The on-line catalogue on the IEC web site(www.iec.ch/searchpub)enables you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as well as corrigenda.IEC Just Published This summary of recently issued publications(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need further assistance,please contact the Customer Service Centre:Email:custserviec.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.INTERNATIONAL STANDARD IEC61169-8 QC 222400First edition2007-02Radio-frequency connectors Part 8:Sectional specification RF coaxial connectors with inner diameter of outer conductor 6,5 mm(0,256 in)with bayonet lock Characteristic impedance 50 (type BNC)IEC 2007 Copyright-all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in writing from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.ch V For price,see current cataloguePRICE CODE Commission Electrotechnique InternationaleInternational Electrotechnical Commission LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 61169-8 IEC:2007(E)CONTENTS FOREWORD.4 1 Scope.6 2 Normative references.6 3 IEC type designation.6 4 Interface dimensions.7 4.1 Dimensions General purpose connectors.7 5 Mechanical gauges and standard test connectors.11 5.1 Mechanical gauges.11 5.2 Standard test connectors.14 6 Outline dimensions.19 7 Quality assessment procedures.19 7.1 General.19 7.2 Ratings and characteristics.19 7.3 Test schedule and inspection requirements.21 7.4 Procedures.23 8 Instructions for preparation of detail specifications.23 8.1 General.23 8.2 Identification of the Detail specification.24 8.3 Identification of the component.24 8.4 Performance.24 8.5 Marking,ordering information and related matters.24 8.6 Selection of tests,test conditions and severities.24 8.7 Blank detail specification pro-forma for type BNC connector.26 Annex A(normative)Information for interface dimensions of 75 characteristic impedance connector with unspecified reflection factor.31 Bibliography.35 Figure 1 Connector with pin-centre contact(for dimensions,see Table 1).7 Figure 2 Details of bayonet lock.8 Figures 3 and 4 Details of alternative coupling grooves.8 Figure 5 Details of pin-centre contact.8 Figure 6 Connector with socket-centre contact(for dimensions,see Table 2).10 Figure 7 Details of socket-centre contact.10 Figure 8 Gauge for outer contact of pin connector.11 Figure 9 Gauge pin for socket-centre contact.12 Figure 10 Dimensions of gauge for performance test(see Table 5).13 Figure 11 Dimensions of connector(see Table 6).15 Figure 12 Dimensions of centre contact(see Table 6).15 Figure 13 Dimensions of connector(see Table 7).17 Figure 14 Dimensions of centre contact(see Table 7).17 Figure A.1 Connector with pin centre contact and Figure A.2 Details of bayonet lock.31