IEC_60748-23-5-2003.pdf

INTERNATIONALSTANDARDIEC60748-23-5QC 165000-5First edition2003-10Semiconductor devices Integrated circuits Part 23-5:Hybrid integrated circuits and film structures Manufacturing line certification Procedure for qualification approvalDispositifs semiconducteurs Circuits intgrs Partie 23-5:Circuits intgrs hybrides et structures par films Certification de la ligne de fabrication Procdure dhomologationReference numberIEC 60748-23-5:2003(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editions The IEC is now publishing consolidated versions of its publications.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publications The on-line catalogue on the IEC web site(www.iec.ch/searchpub)enables you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as well as corrigenda.IEC Just Published This summary of recently issued publications(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need further assistance,please contact the Customer Service Centre:Email:custserviec.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.INTERNATIONALSTANDARDIEC60748-23-5QC 165000-5First edition2003-10Semiconductor devices Integrated circuits Part 23-5:Hybrid integrated circuits and film structures Manufacturing line certification Procedure for qualification approvalDispositifs semiconducteurs Circuits intgrs Partie 23-5:Circuits intgrs hybrides et structures par films Certification de la ligne de fabrication Procdure dhomologation IEC 2003 Copyright-all rights reservedNo part of this publication may be reproduced or utilized in any form or by any means,electronic ormechanical,including photocopying and microfilm,without permission in writing from the publisher.International Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.chVFor price,see current cataloguePRICE CODECommission Electrotechnique InternationaleInternational Electrotechnical Commission LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 60748-23-5 IEC:2003(E)CONTENTSFOREWORD.31Scope.52Normative references.53Terms and definitions.54Qualification approval procedures.54.1General.54.2Marking.54.3Validity of release for delivery.64.4Application for qualification approval.64.5Structural similarity.64.6Materials,piece-parts and added components.64.7Initial qualification approval.64.8Granting of qualification approval.74.9Maintenance of qualification approval.74.10Procedure in the event of a failure in a periodic test.84.11Withdrawal of qualification approval.85Qualification-product assessment level schedules.96Blank detail specification.286.1General.286.2FRONT PAGE FOR COMPONENTS ASSESSED BY QUALIFICATIONAPPROVAL.296.3GENERAL DATA.306.4Inspection requirements.31LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.60748-23-5 IEC:2003(E)3 INTERNATIONAL ELECTROTECHNICAL COMMISSION_SEMICONDUCTOR DEVICES INTEGRATED CIRCUITS Part 23-5:Hybrid integrated circuits and film structures Manufacturing line certification Procedure for qualification approvalFOREWORD1)The International Electrotechnical Commission(IEC)is a worldwide organization for standardization comprisingall national electrotechnical committees(IEC National Committees).The object of IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields.Tothis end and in addition to other activities,IEC publishes In