_STP_1335-1999.pdf

STP 1335 Engine Coolant Testing:Fourth Volume Roy E.Beal,editor ASTM Stock#:STP1335 ASTM 100 Barr Harbor Drive West Conshoshocken,PA 19428-2959 Printed in the U.S.A.Copyright by ASTM Intl(all rights reserved);Sat Dec 26 13:32:57 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.ISBN:0-8031-2610-7 ISSN:1050-7523 Copyright?9 1999 AMERICAN SOCIETY FOR TESTING AND MATERIALS,West Conshohocken,PA.All rights reserved.This material may not be reproduced or copied,in whole or in part,in any printed,mechanical,electronic,film,or other distribution and storage media,without the written consent of the publisher.Photocopy Rights Authorization to photocopy items for internal,personal,or educational classroom use,or the internal,personal,or educational classroom use of specific clients,is granted by the American Society for Testing and Materials(ASTM)provided that the appropriate fee is paid to the Copyright Clearance Center,222 Rosewood Drive,Danvers,MA 01923;Tel:508-750-8400;online:http:/ Review Policy Each paper published in this volume was evaluated by two peer reviewers and the editor.The authors addressed all of the reviewers comments to the satisfaction of both the technical editor(s)and the ASTM Committee on Publications.The quality of the papers in this publication reflects not only the obvious efforts of the authors and the technical editor(s),but also the work of the peer reviewers.In keeping with long standing publication practices,ASTM maintains the anonymity of the peer reviewers.The ASTM Committee on Publications acknowledges with appreciation their dedication and their contribution of time and effort on behalf of ASTM.Printed in Philadelphia,PA May 1999 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 13:32:57 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Foreword The Symposium on Engine Coolant Testing was held 5-7 November 1997 in Scottsdale,Arizona.Committee D15 on Engine Coolants sponsored the symposium.Roy E.Beal,Amal-gamated Technologies,Inc.,presided as symposium chairman and is editor of this publication.Copyright by ASTM Intl(all rights reserved);Sat Dec 26 13:32:57 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Contents Overview ORGANIC ACID INHIBITOR TECHNOLOGY Testing of Organic Acids in Engine Coolants-T.w.WEIR Composition of Incipient Passivating Layers on Heat-Rejecting Aluminum in Carboxylate-and Silicate-Inhibited Coolants:Correlation with ASTM D 4340 Weight Losses-F.T.WAGNER,T.E.MOYLAN,S.J.SIMKO,AND M.C.MILITELLO Fleet Test Evaluation of Fully Formulated Heavy-Duty Coolant Technology Maintained with a Delayed-Release Filter Compared with Coolant Inhibited with a Nitrited Organic Acid Technology:An Interim Report-s.s.AROYAN AND E.R.EATON Engine Coolant Technology,Performance,and Life for Light-Duty Applications-D.E.TURCOTTE,F.E.LOCKWOOD,K.K.PFITZNER,L.L.MESZAROS,AND J.K.LISTEBARGER Copper-Triazole Interaction and Coolant Inhibitor Depletion-L.s.BARTLEY,P.O.FRITZ,R.J.PELLET,S.A.TAYLOR,AND P.VAN DE VEN 23 43 52 76 TEST METHODS Corrosion and Testing of Engine Coolants-R.E.BEAL Predictive Tools for Coolant Development:An Accelerated Aging Procedure for Modeling Fleet Test Results-A.v.GERSHUN AND W.C.MERCER Rapid Electrochemical Screening of Engine Coolants.Correlation of Electrochemical Potentiometric Measurements with ASTM D 1384 Glassware Corrosion Test-o.P.DOUCET,J.M.JACKSON,O.A.KRIEGEL,D.K.PASSWATER,AND N.E.PRIETO 89 113 133 Long-Term Serviceability of Elastomers in Modern Engine Coolants-H.BUSSEM,A.C.FARINELLA,AND D.L.HERTZ,JR.142 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 13:32:57 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.vi CONTENTS Engine Coolant Compatibility with the Nonmetals Found in Automotive Cooling Systems-J.P.GREANEY AND R.A.SMITH Influence of Engine Coolant Composition on the Electrochemical Degradation Behavior of EPDM Radiator Hoses-G.L.M.VROOMEN,S.S.LIEVENS,AND J.P.MAES 168 183 HEAVY-DUTY COOLANT TECHNOLOGY Assessment of the Validity of Conductivity as an Estimate of Total Dissolved Solids in Heavy-Duty Coolants-R.P.CARR Scale and Deposits in High-Heat Rejection Engines-Y.-S.CHEN,E.I.KERSHISNIK,R,D.HUDGENS,C.L.CORBEELS,AND R.L.ZEHR 199 210 ENGINE COOLANT RECYCLING TECHNOLOGY Overview of Used Antifreeze and Industrial Glycol Recycling by Vacuum Distillation-D.K.FRYE,K.CHAN,AND C.POURHASSANIAN Recycling Used Engine Coolant Using High-Volume Stationary,Multiple Technology Equipment-M.E.HADDOCK AND E.R.EATON Development of Mobile,On-Site Engine Coolant Recycling Utilizing Reverse-Osmosis Technology-w.KUGHN AND E.R.EATON Heavy-Duty Fleet Test Evaluation of Recycled Engine