_STP_1356-1999.pdf

STP 1356 Masonry:Materials,Testing,and Applications J.H.Brisch,R.L.Nelson,and H.L.Francis,Editors ASTM Stock#:STP1356 AsTM 100 Barr Harbor Drive West Conshohocken,PA 19428-2959 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:43:46 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Library of Congress Cataloging-in-Publication Data Symposium on Masonry:Materials,Testing,and Applications(1998:Nashville,Tenn.).Masonry:materials,testing,and applications/J.H.Brisch,R.L.Nelson,and H.J.Francis,editors.(STP;1356)p.cm.ASTM stock#:STP 1356.ISBN 0-8031-2600-X I.Masonry-Materials 2.Masonry-Testing 3.Masonry I.Brisch,J.H.,(Joseph H.),1947-.II.Nelson,R.L,(Robert L),1936o.II.Francis,H.J.,(Harry J.),1933-.TA425.M37 1999 693.1-dc21 99-36980 CIP Copyright?9 1999 AMERICAN SOCIETY FOR TESTING AND MATERIALS,West Conshohocken,PA.All rights reserved.This material may not be reproduced or copied,in whole or in part,in any printed,mechanical,electronic,film,or other distribution and storage media,without the written consent of the publisher.Photocopy Rights Authorization to photocopy items for internal,personal,or educational classroom use,or the internal,personal,or educational classroom use of specific clients,is granted by the Amedcan Society for Testing and Materials(ASTM)provided that the appropriate fee is paid to the Copyright Clearance Center,222 Rosewood Drive,Danvers,MA 01923;Tel:508-750-8400;online:http:/ Review Policy Each paper published in this volume was evaluated by two peer reviewers and at least one edi-tor.The authors addressed all of the reviewers comments to the satisfaction of both the technical editor(s)and the ASTM Committee on Publications.To make technical information available as quickly as possible,the peer-reviewed papers in this publication were prepared=camera-ready as submitted by the authors.The quality of the papers in this publication reflects not only the obvious efforts of the authors and the technical editor(s),but also the work of the peer reviewers.In keeping with long-standing publication practices,ASTM maintains the anonymity of the peer reviewers.The ASTM Committee on Publications acknowledges with appreciation their dedication and contribution of time and effort on behalf of ASTM.Printed in Toronto,Ontario,Canada August 1999 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:43:46 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Foreword This publication,Masonry:Materials,Testing,and Applications,contains papers presented at the Symposium on Masonry:Materials,Testing,and Applications presented 8 December,1998 in Nashville,TN.The symposium was sponsored by Committees C-7 on Lime,C-1 on Cement,C-12 on Mortars and Grouts for Unit Masonry,and C-15 on Manufactured Masonry Units.The symposium was chaired by Joseph H.Brisch,with Rockwell Lime Company,Man-itowoc,WI;Robert L.Nelson,of Robert L.Nelson&Associates,Schaumburg,IL;and Harry L.Francis,of Elliston,VA.Each of these men served as editor of this resulting publication.Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:43:46 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Contents Overview vii New Polymer Additives for Mortar Cementms.o.o,r.J.PODt.AS,AND T.S.YOUNG Structural Properties of Autoclaved Aerated Concrete Masonry-J.H.MATTHYS AND R.L.NELSON U.S.Brick Econometrics:1930-1992-c.T.GRIMM AND 8.OABBY Analysis of Limestone and Dolomite by X-Ray FluorescencemB.D.WHEELER Unbonded Capping for Concrete Masonry Units-L.K.CROUCH,M.L.KNIGHT,R.C.HENDERSON,AND W.A.SNEED,JR.Comparison of Actual and Allowable Stress Values for Out-of-Plane Shear on Masonry Walls-R.c.HENDERSON,G.S.WILSON,L.K.CROUCH,AND W.A.SNEED,JR.Use of Ruggedness Testing to Develop an Inter.Laboratory Testing Protocol for Mortar-Cement Mortar-L.o.PONCE,R.E.KLONER,AND J.M.MELANDER Development of an Unbonded Capping System for Clay Masonry Prisms-L.K.CROUCH,R.C.HENDERSON,AND W.A.SNEED,JR.The Importance of Testing to Evaluate the Effect Masonry Walls Have on High-Rise Building Stiffne&s-j.s.WEINSTEIN AND W.A.HOSTETLER In-Situ Evaluation of Compressed Brick Veneer Using the Flatjack Technique-G.R.SELL AND B.A.GABBY Renovation of Existing llasonry Buildings to Residential LoIL-B.s.KASIL,E.A.GERNS,AND K.DEMUTH New NDE Technologies for Evaluating Reinforced Concrete Masonry-A.M.ALEXANDER AND R.W.HASKINS 13 23 34 62 75 89 105 116 125 140 148 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:43:46 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Overview Masonry is one of mankinds oldest arts.The construction of shelters,buildings,castles,and fortresses has been the life work of untol