_STP_1493-2009.pdf

Repair,Retrofit,and Inspection of Building Exterior Wall Systems STP 1493 ASTM INTERNATIONALwww.astm.orgISBN:978-0-8031-3418-8Stock#:STP1493Repair,Retrofit,and Inspection of Building Exterior Wall SystemsJohnson u BoydEditors:Paul G.Johnson Jon M.BoydSTP 1493STP 1493Repair,Retrofit and Inspection ofBuilding Exterior Wall SystemsPaul G.Johnson and Jon M.Boyd,editorsASTM Stock Number:STP1493ASTM International100 Barr Harbor DrivePO Box C700West Conshohocken,PA 19428-2959Printed in the U.S.A.Library of Congress Cataloging-in-Publication DataRepair,retrofit,and inspection of building exterior wall systems/Paul G.Johnson and Jon M.Boyd,editors.p.cm.Includes bibliographical references and indexes.ASTM Stock Number:STP1493.?ISBN 978-0-8031-3418-81.Exterior walls-Maintenance and repair.I.Johnson,Paul G.,1949-II.Boyd,Jon M.,1952-TH2235.R46 2009690.120288-dc222009003037ISBN:978-0-8031-3418-8Copyright 2009 ASTM INTERNATIONAL,West Conshohocken,PA.All rights reserved.Thismaterial may not be reproduced or copied,in whole or in part,in any printed,mechanical,electronic,film,or other distribution and storage media,without the written consent of the publisher.Photocopy RightsAuthorization to photocopy items for internal,personal,or educational classroom use,orthe internal,personal,or educational classroom use of specific clients,is granted by ASTMInternational provided that the appropriate fee is paid to ASTM International,100 BarrHarbor Drive,P.O.Box C700,West Conshohocken,PA 19428-2959,Tel:610-832-9634;online:http:/www.astm.org/copyright/The Society is not responsible,as a body,for the statements and opinions expressed in thispublication.ASTM International does not endorse any products represented in this publication.Peer Review PolicyEach paper published in this volume was evaluated by two peer reviewers and at least oneeditor.The authors addressed all of the reviewers comments to the satisfaction of both the technicaleditor?s?and the ASTM International Committee on Publications.The quality of the papers in this publication reflects not only the obvious efforts of the authorsand the technical editor?s?,but also the work of the peer reviewers.In keeping with long-standingpublication practices,ASTM International maintains the anonymity of the peer reviewers.The ASTMInternational Committee on Publications acknowledges with appreciation their dedication andcontribution of time and effort on behalf of ASTM International.Citation of PapersWhen citing papers from this publication,the appropriate citation includes the paper author?s?,paper title?,J.ASTM Intl.,volume and number,ASTM International,West Conshohocken,PA,Paper,year?listed in the footnote to the paper?,Paper ID JAI100887?located at the top of each firstpage?.This book is a repackaging of those papers.Printed in Dayton,OHMarch 2009ForewordThis publication,Repair,Retrofit and Inspection of Building Exterior Wall Systems,contains papers presented at the ASTM symposium of the same name held on 21,22October,2006 in Atlanta,GA.The symposium was presented by ASTM Committee E-6on Performance of Buildings.The symposium co-chairmen were:Jon Boyd,Klein andHoffman,Inc.,Chicago,Illinois and Paul Johnson,Smith Group,Detroit,Michigan.ContentsOverviewviiTESTING ANDEVALUATIONTECHNIQUESCase History of the Use of Electronic Survey Techniques to Assess Planar Distortionsin Building FaadesKEVINS.COLL ANDDAVIDA.VANOCKER3Qualitative Sampling of the Building Envelope for Water LeakageLONNIEL.HAUGHTON ANDCOLINR.MURPHY12Applying C1601-06 Standard Test Method for Field Determination of WaterPenetration of Masonry Wall Surfaces?in PracticeGERALDA.DALRYMPLEANDA.RHETTWHITLOCK21The Identification of Corrosion-Related Damage from Cramp Anchors in a Limestone-Clad Building Faade Using NDE TechniquesDAVIDA.VANOCKER,ERINM.JOHNSON,ANDTRACYD.MARCOTTE35Snap,Crackle,Pop:Remediation of a Noisy Curtain WallMARKK.SCHMIDTANDW.ROBERTHANNEN47Techniques for Predicting Cladding Design Wind PressuresMATTHEWBROWNE,PETERIRWIN,JASONGARBER,MICHAELCICCI,JANDALE,ANDRUSSPARNELL55INVESTIGATION,REHABILITATION ANDDETAILINGCASESTUDIESErroneous Design Assumptions and Construction Defects in a Thin Stone FaadeSystemMARKK.SCHMIDT ANDJILLH.MURPHY69Energy Savings Resulting from Building Envelope Upgrades in Mid-RiseConstructionA Case StudyJ.ERICPETERSON ANDWILLIAMH.BLODGETT77Delayed Ettringite Formation(DEF)within Pre-cast Concrete Cladding Panels on aMid-Rise Commercial Office Building:A Case StudyWARRENR.FRENCHANDJOSHUAS.SCHROEDER85Sill Pan Flashing for Block-Frame Windows in Recessed Concrete Openings?Case StudiesROBERTBATEMAN107Envelope Remediation?A Case Study in Support of an Over-Cladding ApproachJAREDB.LAWRENCE ANDPAULG.JOHNSON121Over-Cladding of Aluminum Framed Curtainwalls and SkylightsJONM.BOYD139Faade Renovation of the Wexner Center for the ArtsSHAWNS.LIANDNEILMCCLELLAND154vA Form to Follow Function:Recladding A Regional Healthcare FacilityTAMMYD.FORNER161Repair of an Earthquake Damaged Building Faade in Coordination w