_STP_1576-2015.pdf

ASTM INTERNATIONAL Selected Technical PapersSmall Specimen Test Techniques:6th VolumeSTP 1576 Editors Mikhail A.Sokolov Enrico Lucon SELECTED TECHNICAL PAPERSSTP1576Editors:Mikhail A.Sokolov,Enrico LuconSmall Specimen Test Techniques:6th VolumeASTM Stock#STP1576ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.Printed in the U.S.A.Library of Congress Cataloging-in-Publication DataISBN:978-0-8031-7597-6ISSN:1949-4572Copyright 2015 ASTM INTERNATIONAL,West Conshohocken,PA.All rights reserved.This material may not be reproduced or copied,in whole or in part,in any printed,mechanical,electronic,fi lm,or other distribution and storage media,without the written consent of the publisher.Photocopy RightsAuthorization to photocopy items for internal,personal,or educational classroom use,or the internal,personal,or educational classroom use of specifi c clients,is granted by ASTM International provided that the appropriate fee is paid to the Copyright Clearance Center,222 Rosewood Drive,Danvers,MA 01923,Tel:(978)646-2600;http:/ Society is not responsible,as a body,for the statements and opinions expressed in this publication.ASTM International does not endorse any products represented in this publication.Peer Review PolicyEach paper published in this volume was evaluated by two peer reviewers and at least oneeditor.The authors addressed all of the reviewers comments to the satisfaction of both the technical editor(s)and the ASTM International Committee on Publications.The quality of the papers in this publication refl ects not only the obvious eff orts of the authors and the technical editor(s),but also the work of the peer reviewers.In keeping with long-standing publication practices,ASTM International maintains the anonymity of the peer reviewers.The ASTM International Committee on Publications acknowledges with appreciation their dedication and contribution of time and eff ort on behalf of ASTM International.Citation of PapersWhen citing papers from this publication,the appropriate citation includes the paper authors,“paper title”,STP title,STP number,book editor(s),page range,Paper doi,ASTM International,West Conshohocken,PA,year listed in the footnote of the paper.A citation is provided on page one of each paper.Printed in Bay Shore,NYMay,2015 Th is Compilation of Selected Technical Papers,STP1576,Small Specimen Test Techniques:6th Volume,contains 15 peer-reviewed papers presented at a sympo-sium held January 2931,2014 in Houston,TX.Th e symposium was sponsored by ASTM International Committee E10 on Nuclear Technology and Applications and Subcommittee E10.02 Behavior and Use of Nuclear Structural Materials.Th e Symposium Chairpersons and STP Editors are Mikhail A.Sokolov,Oak Ridge National Lab,Oak Ridge,TN,USA and Enrico Lucon,National Institute of Standards and Technology,Boulder,CO,USA.Foreword Tensile TestingInfl uence of Surface Roughness on Tensile Strength of Reduced-Activation Ferritic/Martensitic Steels Using Small Specimens 3Shigekazu Suzuki,Shinnosuke Sato,Miho Suzuki,Hiroshi Kinoshita,Shinji Sato,Shiro Jitsukawa,and Hiroyasu TanigawaMicro-Tensile Test Technique Development and Application to Mechanical Property Determination 12J.Dz ugan,R.Procha zka,and P.Konop kRole of Scale Factor During Tensile Testing of Small Specimens 31Maxim N.Gussev,Jeremy T.Busby,Kevin G.Field,Mikhail A.Sokolov,and Sean E.GrayFracture Toughness TestingInternational Round Robin Test on Master Curve Reference Temperature Evaluation Utilizing Miniature C(T)Specimen 53Masato Yamamoto,Kunio Onizawa,Kentaro Yoshimoto,Takuya Ogawa,Yasuhiro Mabuchi,Matti Valo,Marlies Lambrecht,Hans-Werner Viehrig,Naoki Miura,and Naoki SonedaJ-R Curve Determination for Disk-Shaped Compact Specimens Based on the Normalization Method and the Direct Current Potential Drop Technique 70Xiang Chen,Randy K.Nanstad,and M.A.SokolovExtended Mechanical Testing of RPV Surveillance Materials Using Reconstitution Technique for Small Sized Specimen to Assist Long Term Operation 88J.May,J.Rouden,P.Efsing,M.Valo,and H.HeinRotation Point and KJC Estimations for Miniature CT-Specimens Based on Off -Load Line Displacement 110Matti J.Valo,Tapio K.Planman,and Kim R.WallinContents Small Specimen Reuse Technique to Evaluate Fracture Toughness of High Dose HT9 Steel 121T.S.Byun,S.A.Maloy,and J.H.YoonSmall Punch TestingSmall-Punch Testing for Tensile and Fracture Behavior:Experiences and Way Forward 145Karel MatochaApplication of Miniature Small Punch Test Specimen in Determination of Tensile Properties 160R.Kopriva,M.Brumovsky,M.Kytka,M.Lasan,J.Siegl,and K.MatochaEvaluation of Damage in Materials Due to Fatigue Cycling Through Static and Cyclic Small Punch Testing 168Raghu V.Prakash and S.ArunkumarOther Mechanical TestsCertifi ed KLST Miniaturized Charpy Specimens for the Indirect Verifi cation of Small-Scale Impact Machines 189E.Lucon,C.N.McCowan,R.L.Santoyo,and J.D.SplettEff ect of Hydrogen on Crack Growth Behavior in F82H Steel Using Small