_STP_1416-2002.pdf

STP 1416 Composite Materials:Testing,Design,and Acceptance Criteria A.Zureick and A.T.Nettles,editors ASTM Stock Number:STPI416 INTERNATIONAL ASTM International 100 Barr Harbor Drive PO Box C700 West Conshohocken,PA 19428-2959 Printed in the U.S.A.Library of Congress Cataloging-in-Publication Data Composite materials:testing,design,and acceptance criteria/A.Zureick and A.T.Nettles,editors.p.cm.ASTM stock number:STP1416.Includes bibliographical references and index.ISBN 0-8031-2893-2 1.Composite materials-Congresses.I.Zureick,AbduI-Hamid.I1.Nettles,A.T.(Alan T.)TA418.9.C6 C5545 2002 620.118dc21 2002066562 Copyright?9 2002 AMERICAN SOCIETY FOR TESTING AND MATERIALS INTERNATIONAL,West Conshohocken,PA.All rights reserved.This material may not be reproduced or copied,in whole or in part,in any printed,mechanical,electronic,film,or other distribution and storage media,without the written consent of the publisher.Photocopy Rights Authorization to photocopy items for internal,personal,or educational classroom use,or the internal,personal,or educational classroom use of specific clients,is granted by ASTM International provided that the appropriate fee is paid to the Copyright Clearance Center,222 Rosewood Drive,Danvers,MA 01923;Tel:978-750-8400;online:http: Review Policy Each paper published in this volume was evaluated by two peer reviewers and at least one edi-tor.The authors addressed all of the reviewers comments to the satisfaction of both the technical editor(s)and the ASTM Committee on Publications.To make technical information available as quickly as possible,the peer-reviewed papers in this publication were prepared camera-ready as submitted by the authors.The quality of the papers in this publication reflects not only the obvious efforts of the authors and the technical editor(s),but also the work of the peer reviewers.In keeping with long-standing publication practices,ASTM International maintains the anonymity of the peer reviewers.The ASTM Committee on Publications acknowledges with appreciation their dedication and contribution of time and effort on behalf of ASTM International.Printed in Chelsea,MI June 2002 Foreword This publication,Conqosite Materials:Testing,Design,and Acceptance Criteria,contains papers presented at the symposium of the same name held in Phoenix,Arizona,on 26-27 March,2001.The symposium was sponsored by ASTM International Committee D30 on Composite Materials.The symposium co-chairmen were A.-H.Zureick,Georgia Institute of Technology,Atlanta,Georgia and A.T.Nettles,NASA Marshall Space Flight Center,Hunts-ville,Alabama.Contents Tabbed Versus Untabbed Fiber-Reinforced Composite Compression Specimenso.F.ADAMS Multi-Axial Composite Tube Test MethodD.COHEN Finite Element Analysis of Unidirectional Composite Compression Test Specimens:A Parametric Study-P.J.JOYCE,M.G.VIOLgTTE,AND T.J.MOON Structural Integrity Assessment of Composite Pressure Test Box Through Full Scale Test-B.K.PARIDA,P.K.DASH,S.A.HAKEEM,AND K.CHELLADURAI Qualification Using a Nested Experimental Design-D.RUFFNER AND P.JOUIN The Development and Use of a Common Database for Composite Materialsm P.SHYPRYKEVICH,J.S.TOMBLIN,AND M.G.VANGEL A Comparison of Quasi-Static Indentation Testing to Low Velocity Impact Testing-A.T.NETTLES AND M.J.DOUGLAS Detection and Characterization of Imperfections in Composite Pressure Vessels-J.L.WALKER,S.S.RUSSELL,AND M,D.LANSING Damage Resistance and Damage Tolerance of Pultruded Composite Sheet Materials-R.PRABHAKARAN,M.SAHA,M.DOUGLAS,AND A.T.NETTLES Mechanical Degradation of Continuous Glass Fibre-Reinforced Thermoplastics Under Static and Cyclic Loading:A Prepreg Laminate-Technical Textile Comparison-J.F.NEFT,K.SCHULTE,AND P.SCHWARZER Philosophies for Assessing Durability of Commercial and Infrastructure Composite Systemsms.w.CASE,K.L.REIFSNIDER,AND J.J.LESKO 3 17 30 69 85 99 116 131 139 156 173 Computational Prediction of Yarn Structure of 3D-Braided Composites-G.TERPANT,P.KRISHNASWAMI,AND Y.WANG 188 Principles for Recovering Micro-Stress in Multi-Level Analysis-Y.WANG,C.SUN,X.SUN,AND N.J.PAGANO 200 Measurement of CTE at Reduced Temperature for Stressed Specimens-H.ZHU,W.-Y.LI,A.A.TSENG,AND P.PHELON 212 The Effect of Moisture,Matrix and Ply Orientation on Delamination Resistance,Failure Criteria and Fracture Morphology in CFRP-E.S.GREENHALGH AND S.SINGH 221 Interlaminar Crack Propagation in CFRP:Effects of Temperature and Loading Conditions on Fracture Morphology and Toughness-a.SJOGREN.L.E.ASP,E.S.GREENHALGH,AND M.J.HILEY 235 Buckling and Fracture Behavior of Tapered Composite Panels Containing Ply Drops-a.K.PARIDA,K.VIJAYARAJU,AND P.D.MANGALGIRI 253 Author Index 271 Subject Index 273 Donald F.Adams/Tabbed Versus Untabbed Fiber-Reinforced Composite Compression Specimens Reference:Adams,D.F.,Tabbed Versus Untabbed Fiber-Reinforced Composite Compression Specimens,Composite Materials:Testing,l)esign,and Acceptance(riteria,ASIM SIP 1416,A.Zureick and A.T.Nettles,Eds.,American Society for Test