_STP_1362-1999.pdf

STP 1362 Wear Processes in Manufacturing Shyam Bahadur and John Magee,editors ASTM Stock#:STP 1362 100 Barr Harbor Drive West Conshohocken,PA 19428-2959 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:28:22 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Library of Congress Cataloging-in-Publication Date Wear processes in manufacturing/Shyam Bahadur and John Magee,editors.p.cm.-(STP:1362)ASTM Stock Number:STP1362.Papers presented at a symposium held in Atlanta,GA,May 6,1998.Includes bibliographical references and index.ISBN 0-8031-2603-4 1.Mechanical wear-Congresses.2.Machining-Congresses.I.Bahadur,Shyam,1954-II.Magee,John,1955 Sept 22-Ill.American Society for Testing and Materials.TA418.4.W42 1999 621.9-ddc21 99-11819 CIP Copyright?9 1998 AMERICAN SOCIETY FOR TESTING AND MATERIALS,West Conshohocken,PA.All rights reserved.This material may not be reproduced or copied,in whole or in part,in any printed,mechanical,electronic,film,or other distribution and storage media;without the written consent of the publisher.Photocopy Rights Authorization to photocopy Items for internal,personal,or educaUonal classroom use,or the internal,personal,or educational classroom use of specific clients,is granted by the American Society for Testing and Materials(ASTM)provided that the appropriate fee is paid to the Copy-right Clearance Center,222 Rosewood Drive,Danvers,MA 01923;Tel:508-750-8400;online:http-J/ Review Policy Each paper published in this volume was evaluated by two peer reviewers and at least one editor.The authors addressed all of the reviewers comments to the satisfaction of both the technical editor(s)and the ASTM Committee on Publications.To make technical information available as quickly as possible,the peer-reviewed papers in this publication were prepared camera-ready as submitted by the authors.The quality of the papers in this publication reflects not only the obvious efforts of the authors and the technical editor(s),but also the work of the peer reviewers.In keeping with long standing publication practices,ASTM maintains the anonymity of the peer reviewers.The ASTM Committee on Publications acknowledges with appreciation their dedication and contribution of time and effort on behalf of ASTM.Printed in Mayfield P.A.February 1999 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:28:22 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Foreword This publication,Wear Processes in Manufacturing,contains papers presented at the symposium of the same name held in Atlanta,Georgia on May 6,1998.This symposium was also held in conjunction with the May 7-8 standards development meetings of Committee G-2 on Wear and Erosion,the symposium sponsor.The symposium was chaired by Professor Shyam Bahadur,Iowa State University;John H.Magee,Carpenter Technology,served as co-chairman.They also both served as STP editors of this publication.Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:28:22 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.Contents Overview vii ABRASION IN CERAMIC GRINDING Use of a Two-Body Belt Abrasion Test to Measure the GrindabiUty of Advanced Ceramic MaterialspE3Ts J.BLAU AND ELMER S.ZANORIA Observations on the Grinding of Alumina with Variations in Belt Speed,Load,Sample Rotation,and Grinding Flnids-cHRISTtAN J.SCttWARTZ AND SHYAM BAHADUR 13 WEAR OF CtrrnNO TOOLS Wear Mechanisms of MilHng Inserts:Dry and Wet Cuttlng-aE ou,SON C.1r AND GARY C.BARBER Reducing Tool Wear When Machining Austenitic Stainless Steels-JOtUq H.MAOEE AND TED KOSA Machining Conditions and the Wear of TiC-Coated Carbide Tools-CmJSTmA Y.H.tJt.S-CN t.AND XIM-SENG Turning of High Strength Steel Alloy with PVD and CVD.Coated Inserts-ASHRAF JAWAID AND KABIRU A.OLAJIRE Evaluation of Coating and Materials for Rotating Slitter Knives-MAJ san Tribology in Secondary Wood MachiningmPAK L.gO,HOWARD M.HAWTtIORNE,AND JASMIN ANDIAPPAN 31 48 57 71 86 101 FRICTION IN VIBRATORY CONVEYOR Chaotic Behavior on In.Phase Vibratory Conveyors-JERRY z.RASKX 121 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:28:22 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further reproductions authorized.EROSION In MANUFCImNO Erosion and Corrosion Mechanisms in Pneumatic Conveying of Direct Reduced Iron Pellets-AIERTO J.PtEZ-UNZUETA,DORA MARTINEZ,MARCO A.mORES,R.ARROYAVE,A.VELASCO,AND R.VIRAMONTES Characterization of the Wear Processes due to the Material Erosion MechanismsLUClEN H.CHINCHOLLE 137 150 Copyright by ASTM Intl(all rights reserved);Sat Dec 26 12:28:22 EST 2015Downloaded/printed byUniversity of Washington(University of Washington)pursuant to License Agreement.No further repro