ASTM_F_1333_-_91_2013.pdf

Designation:F133391(Reapproved 2013)An American National StandardStandard Specification forConstruction of Fire and Foam Station Cabinets1This standard is issued under the fixed designation F1333;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This specification provides design and constructioncriteria for double and single fire and foam station cabinets.See Fig.1 and Fig.2.Valves,hose,and fittings are notincluded.1.2 Optional back and legs may be provided.1.3 The values stated in inch-pound units are to be regardedas the standard.The values in parentheses are for informationonly.2.Referenced Documents2.1 ASTM Standards:2A36/A36M Specification for Carbon Structural SteelA53/A53M Specification for Pipe,Steel,Black and Hot-Dipped,Zinc-Coated,Welded and SeamlessA167 Specification for Stainless and Heat-ResistingChromium-Nickel Steel Plate,Sheet,and Strip(With-drawn 2014)3A312/A312M Specification for Seamless,Welded,andHeavily Cold Worked Austenitic Stainless Steel PipesA569/A569M SpecificationforSteel,Carbon(0.15Maximum,Percent),Hot-Rolled Sheet and Strip Commer-cial(Withdrawn 2000)3B209 Specification for Aluminum and Aluminum-AlloySheet and PlateB221 Specification for Aluminum and Aluminum-Alloy Ex-truded Bars,Rods,Wire,Profiles,and TubesF593 Specification for Stainless Steel Bolts,Hex CapScrews,and StudsF594 Specification for Stainless Steel NutsF783 Specification for Staple,Handgrab,Handle,and Stir-rup Rung2.2 American National Standards:4ANSI B18.21.1 Lock WasherANSI B18.22.1 Plain Washer2.3 Other Standards:American Bureau of Shipping Rules for Building andClassing of Steel Vessels5American Welding Society Publication,AWS D 1.1 Struc-tural Welding Code63.Classification3.1 Type I,Single Cabinet(see Fig.1 and Figs.3-9):3.1.1 Grade 1Right-hand door active leaf.3.1.1.1 Class A,Mild SteelSpecification A36/A36M.3.1.1.2 Class B,Stainless SteelSpecification A167.3.1.1.3 Class C,AluminumSpecification B209.3.1.2 Grade 2Left-hand door.3.1.2.1 Class A,Mild SteelSpecification A36/A36M.3.1.2.2 Class B,Stainless SteelSpecification A167.3.1.2.3 Class C,AluminumSpecification B209.3.2 Type II,Double Cabinet(see Fig.2 and Fig.8):3.2.1 Grade 1Right-hand doors active leaf.3.2.1.1 Class A,Mild SteelSpecification A36/A36M.3.2.1.2 Class B,Stainless SteelSpecification A167.3.2.1.3 Class C,AluminumSpecification B209.4.Ordering Information4.1 Fire and foam cabinets ordered in accordance with thisspecification shall include the following:4.1.1 ASTM title,designation,and year of issue,4.1.2 Quantity(number of cabinets),4.1.3 Type,grade,and class,and4.1.4 Optional features.5.Materials and Manufacture5.1 Materials:5.1.1 See Table 1.5.1.2 Class materials.1This specification is under the jurisdiction of ASTM Committee F25 on Shipsand Marine Technology and is the direct responsibility of Subcommittee F25.11 onMachinery and Piping Systems.Current edition approved Oct.1,2013.Published October 2013.Originallyapproved in 1991.Last previous edition approved in 2007 as F1333-91(2007).DOI:10.1520/F1333-91R13.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.4Available from American National Standards Institute(ANSI),25 W.43rd St.,4th Floor,New York,NY 10036,http:/www.ansi.org.5Available from American Bureau of Shipping(ABS),ABS Plaza,16855Northchase Dr.,Houston,TX 77060,http:/www.eagle.org.6Available from American Welding Society(AWS),550 NW LeJeune Rd.,Miami,FL 33126,http:/www.aws.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 NOTE11 in.=25.4 mm.FIG.1 Fire and Foam CabinetType IFIG.2 Fire and Foam CabinetType IITABLE 1 Parts ListItem NumberADescriptionB1 Frameplate,12 gage2 Hinge padflatbar,112in.by 412in.by 12 gage3 Hingeundrilled butt,4 in.long by 2 in.wide,commercialstainless steel4 Braceangle,34by34by18in.5 Doorplate,12 gage6 Stapleround bar,38-in.dimensions in accordance withSpecification F7837 Hookround bar,14in.8 Latchflat bar,316by 1 in.9 Keeperflat bar,31by 1 in.10 Rivetbutton monel or aluminum,14in.11 Clipwrench/nozzle,plate 12 gage12 Snubberrubber,commercial13 Retainerplate,12 gage14 Saddlepipe 6 NPS Schedule 40,Specification A53/A53M15 Straphose securing,quick disconnect,commercial16 Cliphook securing,commercial,Specification A16717 WasherTFE-fluorocarbonOptions18 Backplate,316in.19 Legangle,4 by 3 by38in.,Specification A36/A36M20 Braceangle,4 by 3 by38in.,Specification A36/A36M21 Bolthex head,3816 UNC2A by 114-in.long,stainless steel Type 316,Specificat