TM_F_1021_
_95_2013
Designation:F102195(Reapproved 2013)An American National StandardStandard Specification forFeeders,Detergent,Rinse Agent,and Sanitizing Agent forCommercial Dishwashing and Glasswashing Machines1This standard is issued under the fixed designation F1021;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1.Scope1.1 This specification covers detergent feeders,rinse addi-tive feeders,and sanitizing agent feeders intended to automati-cally maintain the concentration of additives in the wash,recirculated rinse,or non-recirculated rinse water of commer-cial spray-type dishwashing and glasswashing machines.1.2 The values stated in inch-pound units are to be regardedas the standard.The values given in parentheses are forinformation only.2.Referenced Documents2.1 ASTM Standards:2A167 Specification for Stainless and Heat-ResistingChromium-Nickel Steel Plate,Sheet,and StripD3951 Practice for Commercial PackagingF760 Specification for Food Service Equipment Manuals2.2 NSF International Standards:NSF No.29 Detergent/Chemical Feeders for CommercialDishwashing Machines3NSF No.51 Plastic Material and Components Used in FoodEquipment3NSF Food Service Equipment Listing32.3 Underwriters Laboratories Standards:UL 94 Test for Flammability of Plastic Materials for Parts inDevices and Appliances4UL 73 Motor Operated Appliances42.4 American Society of Sanitary Engineering Standards:ASSE 1001 Pipe Applied Atmospheric Vacuum Breakers52.5 Building Offcials and Code Administrators Interna-tional Standard:BOCA Basic Plumbing Code63.Terminology3.1 Definitions:3.1.1 detergent feedera device that automatically feedsdetergents into wash tanks of commercial dishwashing andglasswashing machines.3.1.2 rinse additive feedera device that automaticallyfeeds rinse additives into rinse water of commercial dishwash-ing and glasswashing machines.3.1.3 sanitizing agent feedera device that automaticallyfeeds sanitizer into rinse water of commercial dishwashing andglasswashing machines.4.Classification4.1 GeneralDetergent,rinse additive,and sanitizing agentfeeders shall be of the following types and styles as specified.4.2 Types:4.2.1 Type IDetergent feeder,concentration sensing orcontrolling.4.2.2 Type IIDetergent feeder,timed delivery.4.2.3 Type IIIRinse additive feeder,flow/pressure,orelectrically activated.4.2.4 Type IVRinse additive feeder,timed delivery.4.2.5 Type VSanitizing agent feeder,flow/pressure,orelectrically activated.4.2.6 Type VISanitizing agent feeder,timed delivery.4.3 Styles:4.3.1 Style IDetergent feeder,powder product.4.3.2 Style IIDetergent feeder,liquid product.4.3.3 Style IIIDetergent feeder,slurry product.1This specification is under the jurisdiction of ASTM Committee F26 on FoodService Equipment and is the direct responsibility of Subcommittee F26.01 onCleaning and Sanitation Equipment.Current edition approved March 1,2013.Published April 2013.Originallyapproved in 1986.Last previous edition approved in 2007 as F1021 95(2007).DOI:10.1520/F1021-95R13.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3Available from NSF International,P.O.Box 130140,789 N.Dixboro Rd.,AnnArbor,MI 48113-0140,http:/www.nsf.org.4Available from Underwriters Laboratories(UL),333 Pfingsten Rd.,Northbrook,IL 60062-2096,http:/.5Available from American Society of Sanitary Engineering,901 Canterbury,Suite A Westlake,OH 44145,http:/www.asse-plumbing.org.6Available from Building Officials and Code Administrators International,4051West Flossmoor Rd.,Country Club Hills,IL 60477,http:/www.iccsafe.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 4.3.4 Style IVDetergent feeder,solid cast product.4.3.5 Style VRinse additive feeder,liquid product.4.3.6 Style VIRinse additive feeder,solid cast product.4.4 All detergent,rinse additive,and sanitizing feeders ofthe same manufacture,classification,and model designationshall be identical to the extent necessary to ensure interchange-ability of component parts,assemblies,and spare parts.5.Ordering Information5.1 Purchasers should select from the types and styles offeeders from this specification and include the followinginformation in the procurement document:5.1.1 Title,number,and year of this specification.5.1.2 Type and style of feeder(s)required.5.1.2.1 Individual feeders.5.1.2.2 Combined feeder systems.5.1.3 Type and manufacturers model and electrical charac-teristics of dishmachine or glasswasher for which the feeder isintended.5.1.4 Manufacturers certificat