ASTM_D_1250_-_80_adjunct_volume_9.pdf

Introduction and DisclaimerIn the 1980 printed Petroleum Measurement Tables the volume correction factors have been listed intabular format.All 11 volumes of these Petroleum Measurement Tables in printed format from 1980 arehistorical documents,which have been superseded and changed by two documents:.ASTM D1250 Standard Guide for Use of the Petroleum Measurement Tableso This is a guide for use of the API Chapter 11.1.Adjunct to ASTM D1250(Stock#:ADJD1250-E-PDF)o This PDF provides the implementation procedures for the use of temperature andpressure volume correction factors for generalized crude oils,refined products,andlubricating oils.The 1980 standard and the printed Petroleum Measurement Tables have been superseded by APIChapter 11.1(2004)and include Addendum 1 dated September 2007.The use of the ASTM standardand adjunct remains voluntary and the decision on when to utilize/specify a standard is an issue that issubject to the negotiations between the parties involved in the transaction.ASTM and APl assume noliability for usage.WY TIE INTERNATIORENCA ISO DION OR STANDARDIZATIONAwm器益88R&PETROLEUMMEASUREMENTTABLESVolume Correction FactorsVolume IXTABLE 54C-Volume Correction Factors for Individual andSpecial ApplicationsVolume Correction to 15C Against ThermalExpansion Coefficients at 15CASTM D 1250-80ASTM Designation:D 1250API Standard:2540IP Designation:200Prepared Jointly byAMERICAN SOCIETY FOR TESTING AND MATERIALSAMERICAN PETROLEUM INSTITUTETHE INSTTTUTE OF PETROLEUM1980Publication Code Number 12-412508-09AMERICAN SOCIETY FOR TESTING AND MATERIALSThese tables or the mathematical relationships represented thereby may be usedby anyone desiring to do so,but the American Petroleum Institute,the AmericanSociety for Testing and Materials,and the Institute of Petroleum and their respec-tive members and the U.S.National Bureau of Standards shall not be held respon-sible or liable in any way for loss or damage,including,but not limited to,conse-quential damage,resulting from such usage or for violation of any federal,state,ormunicipal laws,regulations,or practices of the United States or of any foreigncountry.The tables included in this volume and the subroutines from which they weregenerated are voluntary standards and were developed under the auspices of thejoint API/ASTM Committee on Static Petroleum Measurement in part from datagenerated by a project funded by the American Petroleum Institute at the U.S.National Bureau of Standards,Gaithersburg,Maryland.Inquiries concerning application of the tables or the computer subroutines shouldbe addressed to:American Petroleum InstituteMeasurement Coordination2101 L Street,N.W.Washington,D.C.20037Library of Congress Catalog Card Number:80-68070ISBN 0-89364-032-8(Volume IX)ISBN 0-89364-021-2(10 Volume Set)Copyright American Petroleum Institute 1980Reprinted,with permission,by ASTM.Printed in Baltimore,Md.,July 1983Reprinted in Baltimore,Md.,November 1991Reprinted in Baltimore,Md.,May 2006Reprinted in Baltimore,Md.,February 2008