ASTM_D_2084_-_19_rus.pdf

D2084-19 STANDARD TEST METHOD FOR RUBBER PROPERTY VULCANIZATION USING OSCILLATING DISK CURE METER 2019 ():16.09.2019:3752-19/ASTM -,.9,119049.:(499)236-54-49:(499)230-13-72 E-mail:interstgost.ru http:/www.interstandart.ru/(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International ,ASTM International.-,ASTM International ,.This translation is executed by FBU“CIC“Interstandard”of Federal Agency on Technical Regulating and Metrology under the license of American Society for Testing and Materials(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International does not approve and does not confirm these translations and in any cases only the English version published with a sign of ASTM International copyright can be considered as the original version.Reproduction of the specified translations by any Party,except for ASTM International or FBU“CIC“Interstandard”,is strictly forbidden according to the USA legislation and international copyright.ASTM D2084-19 1 D2084-19 1 D2084;,.().1.1.1 .1.2 ISO 3417 .,.1.3,.1.4 1 ASTM D11 ,D11.12 .1 2019.2019.1971.2017.D2084-17.DOI:10.1520/D2084-19.ASTM D2084-19 2,.,.1.5 -,(TT).2.2.1 ASTM:2 D1349 D3185 -(SBR),D3186 -(SBR),D3187 D3190 (CR)D4483 ,2.2 ISO:2 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM.ASTM D2084-19 3 ISO 3417 3 3.3.1 ,:3.1.1 (.1).3.1.2 ,.3.1.3 ,.3.1.4,.3.1.5 ,.3.1.6 (),.3.1.7 ,.3.1.8 ,.3.1.9 ,3 ,25 W.43rd St.,4th Floor,New York,NY 10036.ASTM D2084-19 4 .3.1.9.1 90%-.4.4.1 ,.,(.2).(1 3).,.;-.,.,(.1).4.2 .3 ,.,.ASTM D2084-19 5,.:.:.:.1.2.4.2.1 ,4,5.4.2.2 ,-,ASTM D2084-19 6 4,5.4.2.3 ,2.4.2.4 ,2.1 ,.3.,ODR 5.5.1 ().5.2 ,.2 ,.2 ,.4,5 ,.4,5 ASTM D2084-19 7 ,().6.6.1,:,(.2).6.2 ,.6.2.1 ,.6.2.2 ,HRC 50.4 6 (.1).,20.,.,.6.2.2.1 ,ASTM D2084-19 8,.,.5 .4.6.2.2.2 ,.6.6.2.3 HRC 50.,ASTM D2084-19 9.7(.2).5.6.2.3.1 ,.,.,.7.,.8.,.0,325 (0,128)ASTM D2084-19 10 0,25 (0,100).,0,0125 (0,005).6.2.3.2 .,.6.2.3.3 1,67 (100 )1%.,.6.6.2.3.4 .1,00 0,03 ,.2.,.2 .40 ASTM D2084-19 11,.100 .,3.6.2.4 11,0 0,5 (2500 100-).3 ,345 (50/.)203 (8).,203 (8),11 (2500-):=42DPF(1):F-,P-,D-.,:24dFPc=(2):Pc-,d-(55,9 (2,2).(,Pc./6504485)9,55()11)(4(2=)(3)6.3 0,5C(1F).ASTM D2084-19 12 6.3.1 0,5C(1F).7.6.4 ,.,.1 0,5%.ASTM D2084-19 13:0 25,0 50,0 100 0 200 (0 25,0 50,0 100 0 200-).4 ,.,.7.7.1 ,.7.2 ,.7.3 .23 1C(73 2F)1 .1.,A 55,88 0,13 B 10,64 0,25 C 7,94 0,13 D 18,26 0,13 E 1,57 0,13 F 0,8 0,1 G 4,76 0,13 H 24,07 0,06 I 12,70 0,40 J 2,38 0,40 K 54,61 0,05 L 41,91 0,03 M 5,35 0,01 N 1,65 0,03 O 4,57 0,13 P 15,38 0,03 Q 5,08 0,05 R 41,91 0,03 ASTM D2084-19 14 7.4 ,.8.8.1 9,5 1,5 3(0,58 0,09.)(,30 (1,2)13,5 (0,53).8.2,(116-160%).,8 11 3(9 13 1,15).,.2.,S 35,55 0,01 T 0,80 0,03 U 6,28 0,08 VA 0,80 0,05 0,8 0,1 ,7,5 12,5 WA 0,80 0,05 0,8 0,1 ,7,5 9,5 X 9,50 0,02 -0,00 A 5.ASTM D2084-19 15 9.9.1 160C(320F).9.2 0,5C(1,0F).9.3 ,.D1349.10.10.1 .10.2 ,.8.ODC 10.3 ,ASTM D2084-19 16 ,.,.11.11.1 :11.1.1 ,.,.,.,.11.1.2 ,0,5 (0,5-).,(6.2.2),.,.11.2 .11.2.1 ,(11.2.3).ASTM D2084-19 17 20.,1 ,.,20.20,1 .11.2.2 .1 ,.,12.1.8.5 .,.,.,.220.11.2.3 ,ASTM D2084-19 18,0,025 (0,001).,.0,025 0,001 (0,001 0,00004).12.12.1 :12.1.1 ,12.1.2 (,),12.1.3 ,12.1.4 ,12.1.5 ,12.1.6 ,(,1 1),12.1.7 ,(),12.1.8 ,12.1.9 ,12.1.10 ,.12.2 ,(.1 ).-:1,13()=1,00(-).ASTM D2084-19 19 12.2.1 ML ,(-),ML.12.2.2 (-).12.2.2.1 MHF ,.12.2.2.2 MHR .12.2.2.3 MH ,M.12.2.3 ,.12.2.3.1 tS1 1 (-)ML;1.12.2.3.2 tS2 2 (2-)ML;3(5).12.2.4 ,.12.2.4.1 t x(TCx)x%tx=ML+x(MH ML)/100.6 .10,50 90.12.2.4.2 tx x%,tx=x MH/100.7 .12.2.5 =100/().12.2.6 (PCR MCR),ASTM D2084-19 20 ,/(-/).12.2.6.1 (TPCR TMCR),.13.13.1 D4483.D4483.13.2 ,.5,.6.13.3 1,2 (ODC)c .3.;.,.13.4 1,();(.3).13.5 2,.3,();D3185(SBR,OE-SBR),D3186(SBR-BMB),D3187(NBR)D3190(CR).ASTM D2084-19 21 (,),.3.()1 Sr=,r=(),(r)=().Sr=.R=().(R)=().Sr r(r)A SR R(R)A 1:ML()7,1-9,7 8,4 0,158 0,45 5,4 1,36 3,85 45,8 MH()28,4-38,9 33,7 0,181 0,51 1,5 1,98 5,60 16,6 ts1()2,3-5,3 3,8 0,12 0,34 9,0 0,25 0,71 18,7 t 50()3,9-8,8 6,4 0,15 0,43 6,7 0,34 0,96 15,0 t 90()6,4-14,0 10,2 0,20 0,57 5,6 0,60 1,70 16,7 2:ML()7,6-9,8 8,7 0,215 0,61 7,0 0,735 2,08 23,9 MH()32,0-47,7 39,9 0,35 0,99 2,5 2,60 7,36 18,4 ts1()4,4-5,8 5,1 0,12 0,34 6,7 0,37 1,05 20,6 t 50()7,7-9,9 8,8 0,18 0,51 5,8 0,90 2,55 29,0 t 90()15,9-18,0 17,0 0,19 0,54 3,2 1,50 4,25 25,0 A ,.1 ();.2 ().,.13.6 45 1984 1985.,ISO 3417.ISO 3417 D2084.45 D4483.13.7 45:13.7.1 1984.,.ASTM D2084-19 22 ,19 ,.1985.:13.7.1.1 I 160 (),.13.7.1.2 II 150 (),.4.(3417-ITP)A D SBR 1502 100,0.100,0 SBR 1712A.68,8 137,5.BR(CB441)B.68,8.5,0 5,0 5,0 5,0 1,0 1,5 1,5 1,5 IRB 5C.80,0 60,0.N330 45,0.D.8,8 5,0 5,0 DPPDE.1,5 1,5 1,5 F.1,5 1,5 1,5 TBBSG.1,2 1,0 1,0 TMTDH 3,0.2,0 2,0 2,0 1,13 1,16 1,16 0,98 A 37,5(100 )SBR.B 37,5(100 )BR.C 5 D24 ASTM D 7260T .E-.F-.G N-2-.H .13.7.2 .4.(TMTD).B C ASTM D2084-19 23 .D .13.7.3 1 ITP(,).13.7.4 50 I,45 II I.13.7.5 I(160).5.13.7.6 II(150).6.13.8 ,r,R,(r),(R),.,.3,5 6,().13.9 ,r,.3,5 6.,r,.13.10 ,R,.3,5 6.,R,.ASTM D2084-19 24 5.ISO 3417:1 160C,1 ,ML(N-M)160C :,Sr r(r)SR R(R)4.D 0,39 0,0315 0,0892