ASTM_D_1655_-_22a.pdf

Designation:D165522aStandard Specification forAviation Turbine Fuels1This standard is issued under the fixed designation D1655;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S.Department of Defense.1.Scope*1.1 This specification covers the use of purchasing agenciesin formulating specifications for purchases of aviation turbinefuel under contract.1.2 This specification defines the minimum property re-quirements for Jet A and Jet A-1 aviation turbine fuel and listsacceptable additives for use in civil and military operatedengines and aircraft.Specification D1655 was developedinitially for civil applications,but has also been adopted formilitary aircraft.Guidance information regarding the use of JetA and Jet A-1 in specialized applications is available in theappendix.1.3 This specification can be used as a standard in describ-ing the quality of aviation turbine fuel from production to theaircraft.However,this specification does not define the qualityassurance testing and procedures necessary to ensure that fuelin the distribution system continues to comply with thisspecification after batch certification.Such procedures aredefined elsewhere,for example in ICAO 9977,EI/JIG Stan-dard 1530,JIG 1,JIG 2,API 1543,API 1595,and ATA-103.1.4 This specification does not include all fuels satisfactoryfor aviation turbine engines.Certain equipment or conditionsof use may permit a wider,or require a narrower,range ofcharacteristics than is shown by this specification.1.5 Aviation turbine fuels defined by this specification maybe used in other than turbine engines that are specificallydesigned and certified for this fuel.1.6 This specification no longer includes wide-cut aviationturbine fuel(Jet B).FAA has issued a Special AirworthinessInformation Bulletin which now approves the use of Specifi-cation D6615 to replace Specification D1655 as the specifica-tion for Jet B and refers users to this standard for reference.1.7 The values stated in SI units are to be regarded asstandard.However,other units of measurement are included inthis standard.1.8 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.9 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D56 Test Method for Flash Point by Tag Closed Cup TesterD86 Test Method for Distillation of Petroleum Products andLiquid Fuels at Atmospheric PressureD93 Test Methods for Flash Point by Pensky-MartensClosed Cup TesterD130 Test Method for Corrosiveness to Copper from Petro-leum Products by Copper Strip TestD381 Test Method for Gum Content in Fuels by Jet Evapo-rationD445 Test Method for Kinematic Viscosity of Transparentand Opaque Liquids(and Calculation of Dynamic Viscos-ity)D613 Test Method for Cetane Number of Diesel Fuel OilD1266 Test Method for Sulfur in Petroleum Products(LampMethod)D1298 Test Method for Density,Relative Density,or APIGravity of Crude Petroleum and Liquid Petroleum Prod-ucts by Hydrometer MethodD1319 Test Method for Hydrocarbon Types in Liquid Petro-leum Products by Fluorescent Indicator AdsorptionD1322 Test Method for Smoke Point of Kerosene andAviation Turbine FuelD1660 Method of Test for Thermal Stability of Aviation1This specification is under the jurisdiction of ASTM Committee D02 onPetroleum Products,Liquid Fuels,and Lubricants and is the direct responsibility ofSubcommittee D02.J0.01 on Jet Fuel Specifications.Current edition approved Oct.1,2022.Published November 2022.Originallyapproved in 1959.Last previous edition approved in 2022 as D1655 22.DOI:10.1520/D1655-22A.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the Worl