TM_D_1709_
_04_rus
D 1709-04 STANDARD TEST METHODS FOR IMPACT RESISTANCE OF PLASTIC FILM BY THE FREE-FALLING DART METHOD 2007 :0701-07/ASTM :16.04.2007NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 1 -,.9,-49,-1,119991.:(495)236-54-49,236-43-83:(495)230-13-72 E-mail:interstgost.ru Web:www.interstandart.ru ()(ASTM)100 Harbor Drive,West Conshohocken,PA 19428,USA.ASTM ,ASTM,.,ASTM ().This translation has been made by Federal agency on technical regulating and metrology(Interstandard)under license from the American Society for Testing and Materials(ASTM),100 Barr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM has neither approved nor endorsed this translation,and in all cases only the English edition as published and copyrighted by ASTM shall be considered as the official version.Reproduction of this translation by parties other then Federal agency on technical regulating and metrology of Russia(Interstandard)or ASTM is strictly forbidden under U.S.and international copyright laws.NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 2 D 1709-04 1 D 1709;,.().1.*1.1 ,.(),50%-.1.2 :1.2.1 A 38,10 0,13 1,500 0,005 ,0,66 0,01 26,0 0,4.,1 D20 ASTM,D20.19 .1 2004.,2004.1959.2003.D 1709-03.*.NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 3 50 2 .1.2.2 50,80 0,13 2,000 0,005 ,1,50 0,03 60,0+0,25,-1,70 0,3 2.1.3 :1.3.1 ,.1.3.2 .,.1.3.3 ,.1 ,-,.,.D20.19 .,D20.19 ASTM International.2 ISO 7765-1:1988 .,ISO ,11 .1.5 ,.NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 4 ,.2.2.1 ASTM-:2 D 374 D 618 D 883,D 1248 ,D 3420 ()D 4272 E 177 ,ASTM E691 .2.2 ISO:ISO 7765:1988 1:3 2 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM 3 (ANSI),25 W.43rd St.,4th Floor,New York,NY 10036.NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 53.3.1 ,.D 883.3.2 ,:3.2.1 ,().3.2.2 (),50%.3.2.3 (),.4.4.1 A ,50%-.,.,.4.2,.,.(.15).4.3,NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 6 .4.4 ,.,25%.4.5 ,.,(),D 1709(A),D 3420(A B)D 4272.,D 1709 D 4272,D 1709 ,D 4272 .,.,(.D 3420 D 4272).5.5.1 ,1,NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 7,:5.1.1 ,625 2(1 2).3 ,.,.4 ,.5.1.2 125 2,0 5,0+0,0/-0,15,:5.1.2.1,.5.1.2.2,.,.5.1.2.3 ,.3,0 1 0,125+0,025/-0,04 50 60,125 2,0 NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 8 5,00+0,00/-0,15 150 3,0 6,0+0,02/-0,2 .5.1.2.4 ,0,10 0,004 50D ;,.,125 2,0 5,00+0,00/-0,15.5.1.3 ,2,-,.5.1.4 0,66 0,01 26,0 0,4 A,1,50 0,03 60,0+0,25/-1,70 .5.1.5,0,0025 0,0001 0,0025 0,0001 1 0,4,(.D 374).NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 9 1.1 ,.,.2 :A.-6,5 1 0,25+0,04/-0,03 12,5 0,2 0,50+0,00,-0,02.B.:6,5 1 0,25+0,04/-0,03 115 4,5:1/4-20(N.C.)12,5 0,2 0,50+0,00/-0,02 :No.5-40(N.F.).:A 38,10 0,13 1,500 0,005.B 50,80 0,13 2,000 0,005.9,5(0,38),()0,66 0,01 (26,0 0,4)1,50 0,03 (60,0+0,25,1,70)125 2,0 (5,00+0,00,0,15)NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 10D.E.5.1.6 -.5.1.7 7 0,28 .5.2 A ,6,5 1 0,25+0,04/-0,03 115 4,5 .0,5%.,.125 0,2 0,50+0,00/-0,02 ,.5.2.1 38,10 0,13 1,500 0,005 ,(,).5.2.2 50,80 0,13 2,000 0,005 ,.5.3 :NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 11 A D E 5 ,.().D20.19.5.4 ,A .6,6+1,0/-0,00 0,26+0,03/-0,00.,0,5%.:5.4.1 A 31,5 1 1,25+0,03/-0,05 :,2 5 8 15 8 30 8 60 5.4.2 45,0 1 1,75+0,06/-0,02 :,2 15 8 45 8 90 5.4.3 ,120 0,5%()NOTICE:This standard has either been superseded and replaced by a new version or withdrawn.Pleasecontact ASTM International(www.astm.org)for the latest information.ASTM D 1709-04 12180 0,5%(),.6.6.1 .,.,.6.2 ,.7.7.1 ,23 2C 70-77F 50 5%40 A D 618(,).1C 1,8F 2%-.7.2 23 2C 73,4 3,6F 50 5%,.1C 1,8F 2%-.NOTICE:This standard has either been superseded and replaced by a new ve