ASTM_D_1250_-_80_adjunct_volume_3.pdf

Introduction and DisclaimerIn the 1980 printed Petroleum Measurement Tables the volume correction factors have been listed intabular format.All 11 volumes of these Petroleum Measurement Tables in printed format from 1980 arehistorical documents,which have been superseded and changed by two documents:ASTM D1250 Standard Guide for Use of the Petroleum Measurement Tableso This is a guide for use of the APl Chapter 11.1.Adjunct to ASTM D1250(Stock#:ADJD1250-E-PDF)o This PDF provides the implementation procedures for the use of temperature andpressure volume correction factors for generalized crude oils,refined products,andlubricating oils.The 1980 standard and the printed Petroleum Measurement Tables have been superseded by APlChapter 11.1(2004)and include Addendum 1 dated September 2007.The use of the ASTM standardand adjunct remains voluntary and the decision on when to utilize/specify a standard is an issue that issubject to the negotiations between the parties involved in the transaction.ASTM and API assume noliability for usage.w不no器学STAMDACATION,0若5g,ta蜜条n8布&PETROLEUMMEASUREMENTTABLESVolume Correction FactorsVolumeTABLE 6C-Volume Correction Factors for Individual andSpecial ApplicationsVolume Correction to 60F Against ThermalExpansion Coefficients at 60FASTM D 1250-80ASTM Designation:D 1250API Standard:2540IP Designation:200Prepared Jointly byAMERICAN SOCIETY FOR TESTING AND MATERIALSAMERICAN PETROLEUM INSTITUTETHE INSTTTUTE OF PETROLEUM1980Publication Code Number 12-412508-03AMERICAN SOCIETY FOR TESTING AND MATERIALSThese tables or the mathematical relationships represented thereby may be usedby anyone desiring to do so,but the American Petroleum Institute,the AmericanSociety for Testing and Materials,and the Institute of Petroleum and their respec-tive members and the U.S.National Bureau of Standards shall not be held respon-sible or liable in any way for loss or damage,including,but not limited to,conse-quential damage,resulting from such usage or for violation of any federal,state,ormunicipal laws,regulations,or practices of the United States or of any foreigncountry.The tables included in this volume and the subroutines from which they weregenerated are voluntary standards and were developed under the auspices of thejoint API/ASTM Committee on Static Petroleum Measurement in part from datagenerated by a project funded by the American Petroleum Institute at the U.S.National Bureau of Standards,Gaithersburg,Maryland.Inquiries concerning application of the tables or the computer subroutines shouldbe addressed to:American Petroleum InstituteMeasurement Coordination2101 L Street,N.W.Washington,D.C.20037Library of Congress Catalog Card Number:80-68070ISBN 0-89364-024-7(Volume III)ISBN 0-89364-021-2(10 Volume Set)Copyright American Petroleum Institute 1980Reprinted,with permission.by ASTMPrinted in Baltimore,MD,April 1992.Reprinted in Baltimore,MD.February 2008CONTENTSPAGEIntroductoryInformationForeword.vPreface.viiOfficers of the Committee on Petroleum Measurement and theJoint API/ASTM Committee on Static Petroleum Measurement.ixAPI Measurement Coordinators.xMembers of the COSM Physical Properties Working Group.xMembers of the Institute of Petroleum Measurement and SamplingCommittee and the Calculation and Tables Subcommittee.xiVolume IIITABLES 6A,6B,and 6C-Ccrrection of Volume to 60FAgainst API Gravity at 60F and Thermal ExpansionCoefficients(Abstract Only).Ill-1TABLE 6C-Volume Correction Factorsfor Indivicual and Special Applications,Volume Correction to 60F Against ThermalExpansion Coefficients at 60F.Il-1TABLE 6C(see Note).III-5Appendix to TABLE 6C.II-7Equations and Constants for TABLES 5 and 6.III-7Densities and Coefficients of ThermalExpansion for Each Individual NBS Sample.III-7Note to User:TABLE 6C is internally numbered beginning with page 1.The actualtable begins after the page noted in the contents.