ASTM_D_1250_-_80_adjunct_volume_11-12.pdf

Introduction and DisclaimerIn the 1980 printed Petroleum Measurement Tables the volume correction factors have been listed intabular format.All 11 volumes of these Petroleum Measurement Tables in printed format from 1980 arehistorical documents,which have been superseded and changed by two documents:ASTM D1250 Standard Guide for Use of the Petroleum Measurement Tableso This is a guide for use of the APl Chapter 11.1.Adjunct to ASTM D1250(Stock#:ADJD1250-E-PDF)o This PDF provides the implementation procedures for the use of temperature andpressure volume correction factors for generalized crude oils,refined products,andlubricating oils.The 1980 standard and the printed Petroleum Measurement Tables have been superseded by APlChapter 11.1(2004)and include Addendum 1 dated September 2007.The use of the ASTM standardand adjunct remains voluntary and the decision on when to utilize/specify a standard is an issue that issubject to the negotiations between the parties involved in the transaction.ASTM and API assume noliability for usage.APPROVED AS ANREF.NO:ISODS91/12wm989&PETROLEUMMEASUREMENTTABLESIntraconversion Between VolumeMeasures and Density MeasuresVolume XI/XVOLUME XI-Tables 1,2,3,4,8,9,10,11,12,13,and 14VOLUME XII-Tables 21,22,26,27,28,29,30,31,33,34,51,52,56,57,and58ASTM D 1250-80ASTM Designation:D 1250API Standard:2540IP Designation:200Prepared Jointly byAMERICAN SOCIETY FOR TESTING AND MATERIALSAMERICAN PETROLEUM INSTITUTETHE INSTITUTE OF PETROLEUM1982Publication Code Number 12-412508-11ASTM1916 Race St.,Philadelphia,Pa.19103These tables or the mathematical relationships represented thereby may be usedby anyone desiring to do so,but the American Petroleum Institute,the AmericanSociety for Testing and Materials,and the Institute of Petroleum and their respec-tive members and the U.S.National Bureau of Standards shall not be held respon-sible or liable in any way for loss or damage,including,but not limited to,conse-quential damage,resulting from such usage or for violation of any federal,state,ormunicipal laws,regulations,or practices of the United States or of any foreigncountry.The tables included in this volume and the subroutines from which they weregenerated are voluntary standards and were developed under the auspices of thejoint API/ASTM Committee on Static Petroleum Measurement in part from datagenerated by a project funded by the American Petroleum Institute at the U.S.National Bureau of Standards,Gaithersburg,Maryland.Inquiries concerning application of the tables or the computer subroutines shouldbe addressed to:American Petroleum InstituteMeasurement Coordination Department2101 L Street,N.W.Washington,D.C.20037Library of Congress Catalog Card Number:77-9240Copyright American Petroleum Institute 1982Reprinted,with permission,by ASTM.Printed in Baltimore,Md.,April 2006.Printed in Baltimore,Md.,January 2008.CONTENTSASTM Designation D 1250,API Standard 2540,and IP Designation 200apply to all of the tables that appear in this volume.Introductory InformationForeword.VPreface.viiOfficers of the Committee on Petroleum Measurement and the JointAPI/ASTM Committee on Static Petroleum Measurement.ixAPI Measurement Coordinators.xMembers of the COSM Physical Properties Working Group.xMembers of the Institute of Petroleum Measurement and SamplingCommittee and the Calculation and Tables Subcommittee.xiGeneral1.Interrelation of Units of Measurement.32.Temperature Conversions.5Volume XI Entry with API Gravity3.API Gravity at 60F to Relative Density 60/60F and to Densityat 15C.174.U.S.Gallons at 60F and Barrels at 60F to Litres at 15C againstAPI Gravity at 60F.288.Pounds per U.S.Gallon at 60F and U.S.Gallons at 60F per Poundagainst API Gravity at 60F.309.Short Tons per 1000 U.S.Gallons at 60F and per Barrel at 60Fagainst API Gravity at 60F.4210.U.S.Gallons at 60F and Barrels at 60F per Short Ton againstAPI Gravity at 60F.5311.Long Tons per 1000 U.S.Gallons at 60F and per Barrel at 60Fagainst API Gravity at 60F.6412.U.S.Gallons at 60F and Barrels at 60F per Long Ton againstAPI Gravity at 60F.75