ASTM_D_2013_-_D_2013M_-_20_rus.pdf

D2013/D2013M-20 STANDARD PRACTICE FOR PREPARING COAL SAMPLES FOR ANALYSIS 2020 ():02.06.2020:3890-20/ASTM -,.9,119049.:(499)236-54-49:(499)230-13-72 E-mail:interstgost.ru http:/www.interstandart.ru/(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International ,ASTM International.-,ASTM International ,.This translation is executed by FBU“CIC“Interstandard”of Federal Agency on Technical Regulating and Metrology under the license of American Society for Testing and Materials(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International does not approve and does not confirm these translations and in any cases only the English version published with a sign of ASTM International copyright can be considered as the original version.Reproduction of the specified translations by any Party,except for ASTM International or FBU“CIC“Interstandard”,is strictly forbidden according to the USA legislation and international copyright.ASTM D2013/D2013M-20 1 D2013/D2013M-20 1 D2013/D2013M;,.().1.1.1 2 ,.1.2 :1.2.1 A .1.2.2 B .B.1.2.3 A ,1 ASTM D05 D05.23 .1 2020.2020.1962.2018.D2013/D2013M-18.DOI:10.1520/D2013_D2013M-20.2 .Keller,G.E.(Determination of Quantities Needed in Coal Sample Preparation and Analysis),.232,1965.218-226.ASTM D2013/D2013M-20 2 B.,A1.2,20%.1.3 ,-,-.,;,.1.4 ,.,.1.5 -,(TT).2.2.1 ASTM:3 D121 D2234/D2234M D3173/D3173M 3 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM.ASTM D2013/D2013M-20 3 D3174 D3180 D3302/D3302M D4749 D7430 D7582 E11 E177 ASTM E456 2.2 ISO:4 ISO 13909 .3.3.1 .,D121 E456 E177.4 (ISO),ISO,BIBC II,Chemin de Blandonnet 8,CP 401,1214 Vernier,.,http:/www.iso.org.ASTM D2013/D2013M-20 4 4.4.1 :4.1.1 A ,.4.1.2 B ,.4.1.3 A B .5.5.1 :D2234/D2234M .,.D2013/D2013M (),.,.,.5.2 .,().,ASTM D2013/D2013M-20 5 .5.3 .D3302/D3302M.5.4 .5.5 ,.6.6.1 ,;,6.4.,.,.6.1.1 250 60 :6.1.2 ,.6.1.3 230 9,0 250 10,0,ASTM D2013/D2013M-20 6 ,.6.1.4 (),(),250 60 .6.2 :6.2.1 ,-,-,.1.,.6.2.2 ,.,.60.6.2.2.1 ,14 12,7 1/2 25,4 1 ,2,36 8 4,75 4.2.6.2.2.2 ,24 6,35 1/4 9,52 ASTM D2013/D2013M-20 7 3/8 ,250 60.3.(a)-.1(a),.,.(b).1(b),.(c).1(c),.(d),.,.1 (a)-(b)()15-50/(c)40-100/60/(d)()ASTM D2013/D2013M-20 8 6.2.2.3 ,.6.2.2.4 ,.2.,.6.3 ,.,45 .,.,.,.6.4 E11,:4 4,75 8 2,36 20 850 60 250 6.5 ,.,.ASTM D2013/D2013M-20 9 7.7.1 ,.,A1 A2.,Sda2 20%,So2.7.1.1 ,.7.2 ,.,.,.7.3 ,.D3302/D3302M .7.3.1 .7.3.2 ,.7.3.3 ,ASTM D2013/D2013M-20 10 ,.7.3.4 ,.2 ()7.4 -,.ASTM D2013/D2013M-20 11 8.8.1 ,.D4749.9.9.1 ,(.1).9.2 (.4):9.2.1 .D3302/D3302M.9.2.2 ,7.3 7.4.1.,95%,A A B 4,75 4 2000 4000 2,36 8 500 1000 850 20 250 500 250 60 50 50(100%)A ,500 4 4,75 8 2,36.ASTM D2013/D2013M-20 12 9.2.3 A :9.2.3.1 4,75 4 2,36 8,7.9.2.3.2 ,.1.3 ()9.2.3.3 ,.,.ASTM D2013/D2013M-20 13 .2 6.2.2.,.-,.,.9.2.3.4 4,75 4,2,36 8 ,.1 4,75 4.9.2.3.5 2,36 8 ,.1 2,36.9.2.3.6 (.6.1),2,36-8,250 60.(.6.2.2)50.250 60.,.ASTM D2013/D2013M-20 14 .4 9.2.3.7 9.2.3.6,2,36 8 95%?4,75 (4)?4,75 (4)2,36 (8),1 ,1 2,36 (8)850 (20),1 250 (60)50 850 (20)?ASTM D2013/D2013M-20 15 850 20.,.1,250 60 9.2.3.6.9.2.3.8 50 ,(.6.3).9.2.4 B :9.2.4.1 ,(.6.2.1),.1.9.2.4.2 .,.60 .1 ,.9.2.4.3 ,100%250 60 50,9.2.3.8 ,.10.,()10.1 ,().2.ASTM D2013/D2013M-20 16 (,),().3.,(,),.,250 60 ,.,.,.,.2 (),.D2013/D2013M ,.3 ,ASTM D2013/D2013M-20 17 .,.10.2 ,.,(,75%50%),.,.(,2,36 8),.,.1.,D7430 D3302/D3302M,.,.10.3 ,.,.250 60,.ASTM D2013/D2013M-20 18 ,.10.3.1 250 60,.10.3.1.1 250 60 D3173/D3173M,D3302/D3302M,D7582.R1,R2,R3.Rn.10.3.1.2 ,L1,L2,L3.Ln.,()(Ltotal),.10.3.1.3 (Mc),50,.10.3.1.4 (M1,M2,M3.Mn),:(1)10.3.1.5 0,001,.10.3.1.6 (.D3302/D3302M D3180),(ADLc).:(2):ASTM D2013/D2013M-20 19 ADL1-;ADL2-;ADLn-n-.10.3.2 250 60,.10.3.2.1 ,.,.,.1,.4.,.10.3.2.2 ,.,.1.,0,01.5.,.4 ,.1 ,.1 4 ISO 13909.5 ,.,.ASTM D2013/D2013M-20 20 11.11.1 ()A1 A2.,.12.12.1;()A1.A1.1 A1.1.1 .,.A1.1.2,.A1.2.A1.2.1 95%,4,75 4,.A1.2.1.1 2,36 8,4;ASTM D2013/D2013M-20 21 4 8,8 ,4,8.8,4,8.A1.2.2 .1.A1.2.2.1 20%,.1,10%.A1.2.3 4,75 4 95%,2,36 8,.1.A1.2.4 ,8,100%250 60,50.A1.2.5 D3174 .A1.2.5.1 ,().A1.2.5.2 .,.A1.2.6 ASTM D2013/D2013M-20 22 .A1.2.6.1 ,.A1.2.6.2 ,.A1.3.A1.3.1 ,.:VP ;VQ ;VR ,:(1.1):N-;X1,X2,X3,X4,Y1,Y2,Y3,Y4-.(1.2)(1.3)A1.3.2 ,V1;,V2;Va.:Va=1/2 VP;ASTM D2013/D2013M-20 23 V2=1/2 VQ-1/4 VP;V1=1/2 VR-1/4 VQ.A1.3.3 ,Sda2,:Sda2=Va+V2+V1(1.4)A1.3.4 .A1.1.ASTM D2013/D2013M-20 24 A1.1.A A ,.,.,0,072 0,0056,.2 2 2 2 2 2 2:ASTM D2013/D2013M-20 25 A2.A2.1 A2.1.1 ,Sda2,.,.,.A2.2.A2.2.1 ,:A2.2.1.1 ,;A2.2.1.2 ;A2.2.1.3 ;A2.2.1.4 .A2.2.2 :Sda2-;ASTM D2013/D2013M-20 26 x2-;(x)2-,.A2.2.3 ,.Sda2 ,2,99 19 20.,.,30 1,88 19 20.,Sda2 30 .,D2013/D2013M,.A2.2.4 ,.A2.1.24 (19,28%).21-30 ,15%(.A2.1).ASTM D2013/D2013M-20 27 A2.1.1 10%.A C .Sda2(9)Sda2(10).2,99 19 20.B C .Sda2(10)Sda2.1,88 19 20.C 1,88.ASTM D2013/D2013M-20 28 ASTM International -,.,.,.-ASTM International.,.,.ASTM International,100 Barr Harbor Drive,West Conshohocken,PA 19428.610-832-9585,610-832-9555 E-mail:serviceastm.org ASTM:(www.astm.org).,222 Rosewood Drive,Danvers,MA 01923,Tel:(978)646-2600;http:/.