ASTM_D_3783_-_02.pdf

Designation:D 3783 02Standard Performance Specification forWoven Flat Lining Fabrics for Mens and Boys Apparel1This standard is issued under the fixed designation D 3783;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon(e)indicates an editorial change since the last revision or reapproval.1.Scope1.1 This performance specification covers woven flat liningfabrics composed of any textile fiber or mixture of textile fibersfor mens and boys apparel.1.2 This performance specification is not applicable towoven pile,woven fusible,fire-bonded fusible,sliver-knit pile,and sheepskin lining fabrics.1.3 These requirements apply to the length and widthdirections for those properties where fabric direction is perti-nent.1.4 The following safety hazards caveat pertains only to thetest method described in this specification:This standard doesnot purport to address all of the safety concerns,if any,associated with its use.It is the responsibility of the user of thisstandard to establish appropriate safety and health practicesand determine the applicability of regulatory limitations priorto use.2.Referenced Documents2.1 ASTM Standards:D 123 Terminology Relating to Textiles2D 434 Test Method for Resistance to Slippage of Yarns inWoven Fabrics Using a Standard Seam2D 1336 Test Method for Distortion of Yarn in WovenFabrics2D 1424 Test Method for Tear Resistance of Woven Fabricsby Falling-Pendulum(Elmendorf)Apparatus2D 5034 Test Method for Breaking Force and Elongation ofTextile Fabrics(Grab Test)3D 2261 Test Method for Tearing Strength of Woven Fabricsby the Tongue(Single-Rip)Method(Constant-Rate-of-Extension Tensile Testing Machine)2D 2262 Test Method for Tearing Strength of Woven Fabricsby the Tongue(Single Rip)Method(Constant-Rate-of-Traverse Tensile Testing Machine)2D 2724 Test Methods for Bonded,Fused,and LaminatedApparel Fabrics2D 2905 Practice for Statements on Number of Specimensfor Textiles22.2AATCC Test Methods:48 Colorfastness to Crocking:AATCC Crockmeter Method15 Colorfastness to Perspiration16 Colorfastness to Light323 Colorfastness to Burnt Gas Fumes361 Colorfastness to Washing,Domestic,and Laundering,Commercial:Accelerated96 Dimensional Changes in Laundering of Woven andKnitted Textiles Except Wool116 Colorfastness to Crocking:Rotary Vertical CrockmeterMethod124Appearance of Durable Press Fabrics after RepeatedHome Launderings132 Colorfastness to Drycleaning135 Dimensional Changes in Automatic Home Launderingof Durable Press Woven or Knit Fabrics172 Colorfastness to Non-Chlorine Bleach in Home Laun-dering188 Colorfastness to Chlorine Bleach in Home LaunderingEvaluation Procedure 1 Gray Scale for Color ChangeEvaluation Procedure 2 Gray Scale for StainingEvaluation Procedure 3 AATCC Chromatic TransferenceScale2.3Federal Standards:16 CFR 1610 Standard for Flammability of Clothing Tex-tiles516 CFR Chapter IIConsumer Product Safety Commis-sion,Subchapter D-Flammable Fabrics Act Regulations52.4Military Standard:MIL-STD-105D Sampling Procedures and Tables for In-spection by Attributes61This specification is under the jurisdiction of ASTM Committee D13 onTextiles and is the direct responsibility of Subcommittee D13.61 on Apparel.Current edition approved Jan.10,2002.Published April 2002.Originallypublished as D 3783 79.Last previous edition D 3783 95a.2Annual Book of ASTM Standards,Vol 07.01.3Annual Book of ASTM Standards,Vol 07.02.4Available from the American Association of Textile Chemists and Colorists,P.O.Box 12215,Research Triangle Park,NC 27709.5Available from Superintendent of Documents,Government Printing Office,Washington,DC 20402.6Available from Standardization Documents Order Desk,Bldg.4 Section D,700Robbins Ave.,Philadelphia,PA 19111-5094,Attn:NPODS.1Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959,United States.NOTE1Reference to test methods in this specification give only thepermanent part of the designation of ASTM,AATCC,or other testmethods.The current editions of each test method cited shall prevail.3.Terminology3.1 Definitions:3.1.1 lining fabricfor apparel,a textile used to cover theinner side of garments.3.2 For definitions of textile terms used in this specificationrefer to Terminology D 123 and the Technical Manual of theAmerican Association of Textile Chemists and Colorists.3Definitions found in a dictionary of common terms are suitablefor terms used in this specification.4.Specification Requirements4.1 The properties of flat woven lining fabrics for mens andboys apparel shall conform to the specifications requirementsin Table 1.5.Significance and Use5.1 Upon mutual agreement between the purchaser and thesupplier,woven fabrics intended for this end use should meetall of the requirements listed in Table 1 of this specification.5.2 It is recognized that for purposes of fashion or aesthe