ASTM_D_56_-_16a_rus.pdf

D 5616a STANDARD TEST METHOD FOR FLASH POINT BY TAG CLOSED CUP TESTER 2017 ():27.01.2017:3073-17/ASTM -,.9,-49,-1,119991.:(499)236-54-49:(499)230-13-72 E-mail:interstgost.ru http:/www.interstandart.ru/(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International ,ASTM International.-,ASTM International ,.This translation is executed by FBU“CIC“Interstandard”of Federal Agency on Technical Regulating and Metrology under the license of American Society for Testing and Materials(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International does not approve and does not confirm these translations and in any cases only the English version published with a sign of ASTM International copyright can be considered as the original version.Reproduction of the specified translations by any Party,except for ASTM International or FBU“CIC“Interstandard”,is strictly forbidden according to the USA legislation and international copyright.ASTM D 56-16a 1 D 5616a 1 D 56;,.().,.,.,D 3941,.D 3941 ,.1 ASTM D02 ,D02.08 .1 2016.2016.1918.2016.D56-16.DOI:10.1520/D0056-16A.ASTM D 56-16a 2 D 56,D 3941 ,.,.,.1.*1.1 ,5,5 2/()40 C(104 F)9,5 21.1.1 D 93 ,:5,5/()25 C(77 F),93 C(200 F).2/()40 C(104 F);9,5 21.1.2 .D 1310 D 3143./()25 C(77 F);93 C(200 F);.1 (RSTA)2 2 .49 CFR,1,.29 CFR,XVII.,.,20402.ASTM D 56-16a 3 (OSHA),37,8 C(100 F),5,5 2/()40 C(104 F),9,5 21.2 ,.,./()25 C(77 F),.1.3 D 93,D 1310,D 3828,D 3278 D 3941.1.4,.,.1.5 ,.,EPA()http:/www.epa.gov/mercury/faq.htm.,/.ASTM D 56-16a 4 1.6 ,.,.8.2,8.3,9.5,12.5,.2.2.1 ASTM:3D 93 -D 1310 D 3143 D 3278 D 3828 D 3941 D 4057 D 6299 3 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM.ASTM D 56-16a 5 D 6300 E 1 ASTM E 502 ASTM 2.2 :4 1101,791b 4291,141A 2.3 ISO:5 34 35 .3.3.1:3.1.1 ,101,3,.3.1.1.1 ,.3.1.1.2 4 ,.,20402.5 (ANSI),:25 W.43-.,4-.,.-,.-10036,http:/www.ansi.org.ASTM D 56-16a 6,.3.2 ,:3.2.1 (),.3.2.1.1 ,.3.2.2 ,.3.2.2.1 ,.4.4.1 .,.5.5.1 ASTM D 56-16a 7 .,.5.2 .5.3 .,.6.()6.1 .1 A1.6.2 460 (18)610 (24),.6.3 ,.1,.,.2 ,ASTM,IP 15C PM-Low .ASTM D 56-16a 8 .1.()ASTM D 56-16a 9 1.4 C(40 F)4 49 C(40 120 F)49 C(120 F)ASTMA 57C (57F)9C (9F)57C (57F)9C (9F)E1.7.7.1 .,10 C(18 F).,.7.2 ,.7.3 50 .D 4057.8.()8.1 ,.,.ASTM D 56-16a 10 8.2 ,.(,3 (12).)8.3 13 C(55 F)60 C(140 F),1+1(.)13 C(55 F)60 C(140 F)-.10 C(18 F).().3 -,0 C(32 F).8.4 (.11.2.3)()A2,.,.9.5,(.13).,.2.1 ,(.A2).ASTM D 56-16a 11 8.5 ().(.A2).8.6 ,.8.4 8.5,A1,(.A1.1.3),(.A1.1.3.3),(.A1.1.3.4).-,.8.4,.9.()9.1 ,50 0,5 ,27 C 5 C(80 F 10 F),10 C(18 F),.,10 C(18 F).,.;,.ASTM D 56-16a 12 9.2 ,.,.,1,.-.,.10 C(18 F).9.2.1 .,.,.9.3 60 C(140 F),60 C(140 F),1 C(2 F)/6.5 C(10 F),9.2,0,5 C(1 F).9.4 60 C(140 F),60 C(140 F),3 C(5 F)/6.5 C(10 F),9.2,ASTM D 56-16a 13 1 C(2 F).9.5 ,3.1.1,.,.(,.()-.X1 X2.)9.6 .,.9.7 -,/,.9.8 ;.ASTM D 56-16a 14 10.()10.1 ,.9.A1.1 A1.2.10.2 .11.()11.1 ,.,.11.2 ,.11.2.1 .11.2.2 .11.2.3 ()A2,.,.9.5,(.13).ASTM D 56-16a 15 ,.2.1 ,(.A2).11.2.4 ().(.A2).11.2.5 ,11.2.3 11.2.4,A1,(.A1.1.3),(.A1.1.3.3),(.A1.1.3.4).-,11.2.3,.12.()12.1 ,10 C .12.2 .12.3 ;.4 ,.,10 C(18 F)ASTM D 56-16a 16 .5 ,.,.12.4 ,50 0,5 ,27 C 5 C(80 F 10 F),10 C(18 F),.,10 C(18 F).,.;,.,.,4 (5/32 6 ,).,.,.,.10 C(18 F).ASTM D 56-16a 17 .12.5 ,.,.(,.()-.X1 X2.)12.6 (55 C(130 F),.13.13.1 .101,3 (760 .),:=C+0,25(101,3 p)(1)=F+0,06(760 P)(2)=C+0,033(760 P)(3):ASTM D 56-16a 18 -,C;F-,F;p-,;P-,.13.2 ,.-,;.13.3 0,5 C(1 F).14.14.1 (95%):14.1.1 ,20:,C(F),C(F)60 C(140 F)1,2 C(2.0 F)60 C(140 F)1,6 C(3.0 F)14.1.2 ,20:,C(F),C(F)60 C(140 F)4,3 C(8 F)60 C(140 F)5,8 C(10 F)ASTM D 56-16a 19 14.2 ,D 56,.-,.7 ,(),.8 1991.6 (8).(12)(17).15.15.1;.6 ASTM RR:S15-1007.ASTM D 56-16a 20 ()A1.A1.1 A1.1.1 ,:A1.1.2 ,.A1.1.A1.1.3:A1.1.3.1 :-,15,9 (5/8-;);-,;-,.A1.2 ,.A1.1.3.2 0,4 (0,002),.,ASTM D 56-16a 21,.A1.1.3.3 ,.,.A1.1.,2 (0,08)(.A1.3).,.A1.1.3.4 ,.A1.1.A1.1.4 ,.A1.3.,.20 B&S(0,812).A1.1.5,(,.),.9.,.A1.1.6 .ASTM D 56-16a 22 ,.1,().A1.1.ASTM D 56-16a 23 A=7.15 =4,78 C=15,10 D=11,92 E=10,32 0,13,.-0,03 0,001 10,32 0,406 0,13 0,005 11,92 0,469 4,78 0,188 15,10 0,594 7,15 0,281 18,0 0,71 9,84 0,387 20,6 0,81 1 ,.A1.2 ,.-9,84;0,03 ASTM D 56-16a 24 -6,4 0,25 82,6 3,25 95,3 3,75 .A1.3.()6,4 .95,3 .82,6 .ASTM D 56-16a 25 A1.1 27,8 0,4 (1,094 0,016)29,4 0,8 (1,156 0,031),45,0 0,8 (1,77 0,031)54,0 0,3 (2,125 0,010)4,0 0,8 (0,156 0,031)1,2 0,3 (0,049 0,010)2,0 .(0,079 .)A2.A2.1 (),(99+%),D 6300(ASTM RR:D02-1007)ISO 34 ISO 35.A2.1.1 ,.A2.1(.A2.2).,.,0,7.90%95%.ASTM D 56-16a 26 A2.1 D 56 (%)(C)(0,7R)(C)-99+50,9 3,0-99+67,1 4,1 A2.1 .A2.1 RR:S15-1010.7 A2.2 ,.2.1,ASTM(.RR:S15-1010 7 A2.3 -,A2.1.1.).,D 6300(ASTM RR:D02-1007)ISO 34 ISO 35.,.A2.2 (),(99+%),.A2.2.1 (3),.D 6299.7 ASTM RR:S15-1010.ASTM D 56-16a 27 A3.A3.1 ,-(D 93),.,-.,.A3.2 E01.21 ,.A1.1,A3.1 A3.2.,.ASTM D 56-16a 28 -0,05 0,002 8,6 0,34 5,3 0,21 9,8 0,385 7,1 0,28 17,3 0,68 .A3.1 ()17,3 5,3 8,6 .7,1 9,8 (+0.000;-0.05)ASTM D 56-16a 29 -1,5 0,06 7,23 0,284 8,40 0,330 .A3.2 ()().8,40 .7,23 1,5 ASTM D 56-16a 30 ()X1.X1.1 ,.,.X1.2 ,().X1.3 ,3.1.1.,-.X1.4 ,.,.X1.5 ,.X1.6 E 502.A