ASTM_D_5_-_D_5M_-_19_rus.pdf

D5/D5M19 STANDARD TEST METHOD FOR PENETRATION OF BITUMINOUS MATERIALS 2019 ():18.09.2019:3755-19/ASTM -,.9,119049.:(499)236-54-49:(499)230-13-72 E-mail:interstgost.ru http:/www.interstandart.ru/(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International ,ASTM International.-,ASTM International ,.This translation is executed by FBU“CIC“Interstandard”of Federal Agency on Technical Regulating and Metrology under the license of American Society for Testing and Materials(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International does not approve and does not confirm these translations and in any cases only the English version published with a sign of ASTM International copyright can be considered as the original version.Reproduction of the specified translations by any Party,except for ASTM International or FBU“CIC“Interstandard”,is strictly forbidden according to the USA legislation and international copyright.ASTM D5/D5M-19 1 D5/D5M19 1 D5/D5M;,.()1.1.1 .1.2,500.1 .D244.1.3,-,.,1 ASTM D04 D04.44 .1 2019.2019.1959.2013.D5/D5M-13.DOI:10.1520/D0005_D0005M-19.ASTM D5/D5M-19 2 ,.1.4 ,.(,).1.5 ,.,.1.6 -,(TT).2.2.1 ASTM:2 D8 D36/D36M ()D244 2 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM.ASTM D5/D5M-19 3 D3666 ,E1 ASTM E77 E1137/E1137M E2251 ASTM 2.2 ANSI:3 B46.1 2.3 ISO:3 ISO 468 .,3.3.1 ,D8.3.2 :3.2.1 ,.4.4.1 ().3 (ANSI):25 W.43-.,4-.,.-,.-10036,http:/www.ansi.org.ASTM D5/D5M-19 4 ,.5.5.1 .,.2 ,.,D3666,.,D3666 .;D3666 .6.6.1 ,()0,1.47,5 0,05.-50,0 0,05.50 0,05 100 0,05 100 200,.,90 .ASTM D5/D5M-19 5 6.1.1 .6.2 :6.2.1 (.1),440-C ,54 60 (HRC).50 2,60 2,4.1,00 1,02 0,0394 0,0402.8,7 9,7 .0,2 0,008.0,14 0,16 0,0055 0,0063 2.B 46.1 ISO 468,Ra,0,2 0,3 8 12 .,Ra,0,025 0,125 1 5.3,2 0,05 0,126 0,002 38 1 1,50 0,04.40 45 1,57 1,77,50-55 1,97 2,17.()1 0,04.-2,50 0,05.(ASTM D5/D5M-19 6 ).;3-.1.6.2.2 ,.6.2.1.12.6.3 ,:40:,33-50 ,8-16 200:,55 ,35 200 350:,55-80 ,45-70 350 500 ,55-70 ,70-80 3 :338,4015,5535,7045,8050 7080.6.3.1 :5535 200,7045 200 350,7080 350.1,00 1,02 0,14 0,16 8,7 9,7 6,35 ASTM D5/D5M-19 7 6.4 25 0,1 C 77 0,2 F 0,1 C 0,2 F.,50 100 .,.4 .-,.6.5 -,350 .,.6.6 ,0,1 0,1 60-.,0,5.11-5 0,1.,0,1.6.7 ASTM D5/D5M-19 8 0,1 C 0,2 F -,.E1 E2251.E1137/E1137M.6.7.1 ,:ASTM-17C 17F 19 27 C 6680 F 63C 63F -8 +32 C 1889 F 64C 64F 25 55 C 77131 F 6.7.2,E77.E1137/E1137M.7.7.1 ,.60 C 140 F D36/D36M,90 C 194 F ().,.,.7.2 ,ASTM D5/D5M-19 9 120%.65,200,.5 .7.3 15 30 C 59 86 F 20 40 (338),45 1,5 (3316),1 1,5 (5535)1,5 2 .-(),.(338)20-40,(3316)45-1,5,(5535)1 1,5,1,5 2.6 ,.,.8.8.1 ,:25 C 77 F,100 5,.,:,C F,0 32 200 60 4 39,2 200 60 45 113 50 5 46,1 115 50 5 .ASTM D5/D5M-19 10 9.9.1 ,.350,;.,.,50-,100 0,1.9.2 ,.,-,-.9.3 ,.9.4 ,.,.,.,.9.5 10 10 .-,ASTM D5/D5M-19 11 -.200,.65,200,.7.2.7 55-200 ,.,10.1.10.10.1 ,:0-49 50-149 150-249 250-500 2 4 12 20 11.11.1 AMRL(-),16000 25 C 77 F 4000 4 C 39,2 F.29 286,25 C 77 F.ASTM D5/D5M-19 12 ,:x=()=()25 C 77 F x 60,=0,8+0,03 x 60 25 C 77 F x 60,=2,5+0,05 x 60 4 C 39,2 F =0,8+0,02(x)4 C 39,2 F =2,5+0,08(x)11.2 (95%),.11.1,2,83 .11.3 ,.12.12.1;ASTM D5/D5M-19 13 ASTM International -,.,.,.-ASTM International.,.,.ASTM International,100 Barr Harbor Drive,West Conshohocken,PA 19428.610-832-9585,610-832-9555 E-mail:serviceastm.org ASTM:(www.astm.org).,222 Rosewood Drive,Danvers,MA 01923,Tel:(978)646-2600;http:/.