ASTM_D_882_-_12_rus.pdf

:D 88212 STANDARD TEST METHOD FOR TENSILE PROPERTIES OF THIN PLASTIC SHEETING ():2118-13/ASTM :19.09.2013 2013.(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International ,ASTM International.-,ASTM International ,.This translation is executed by FBU“CIC“Interstandard”of Federal Agency on Technical Regulating and Metrology under the license of American Society for Testing and Materials(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International does not approve and does not confirm these translations and in any cases only the English version published with a sign of ASTM International copyright can be considered as the original version.Reproduction of the specified translations by any Party,except for ASTM International or FBU“CIC“Interstandard”,is strictly forbidden according to the USA legislation and international copyright.-,.9,-49,-1,119991.:(499)236-54-49:(499)230-13-72 E-mail:interstgost.ru http:/www.interstandart.ru/ASTM D 882-12 :D 88212 1 D 882;,.().1013 406.1.*1.1 (1,0 (0,04).1 D 883 0,25 (0,010).2 1,0 (0,04)D638.1.2 1 ASTM D20 D20.19 ,.1 2012.2012.1946.2010.D882-10.DOI:10.1520/D0882-12.*3ASTM D 882-12 .1.3 ,.1.4 .3 ;,5.2,.1.5 ,.1.6,.1.7 ,.,.4 ISO 527-3,.ISO 527-3 ,.4ASTM D 882-12 2.2.1 ASTM:2 D 618 D 638 D 883,D 4000 D 5947 D 6287 D 6988 E 4 E 691 2.2 ISO:ISO 527-3 3:3 3.3.1:3.1.1 ,D638.3.1.2 2 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM.3 (ANSI),25 W.43rd St.,4th Floor,New York,NY 10036,http:/www.ansi.org.5ASTM D 882-12 ,.3.1.3 ,.3.1.4 ,.4.4.1 ,.,.,.,.,.1 6ASTM D 882-12 D 4000 ASTM .4.2 -,.,-,.4.3 .,.4.4 (),.,.,.4.5,.5.5.1 ,7ASTM D 882-12 :5.1.1 ,.5.1.2 ,.5.1.3 ;().,.5.1.3.1 .,.5.1.3.2 ,.,;,.5.1.3.3 ,.,.8ASTM D 882-12 ,.,0,75 1,00 (0,030 0,040),.,(.5 7).,.5 ,LLDPE VLDPE.,.6 ,(,:,).7 ,800.,.5.1.4 .9.5.1.5 ,9ASTM D 882-12.(.8).(.5.2),2%.,1%.E4.5.1.6 ,.(.8)1%.5.2 ().,(.8.3).,.,.(.8).5.2.1 -,-10ASTM D 882-12 (20%),1%,E83 C.5.2.2 -,-(20%),10%.8 .().5.3 ,D 5947 D 6988,.5.4 ,0,25 (0,010).5.5 ,.D 6287.5.5.1,10 20%.5.5.2 -.5.5.3 ,.11ASTM D 882-12 6.6.1 50 (2),.6.2 5,0 (0,20)25,4 (1,0).6.3 ,.,.6.4 ,(.9).5%.9 ,.6.5 ,10%0,25 (0,010),5%0,25 (0,010),1,00 (0,040).10 ,6.5,.6.6 ,.6.7 250 (10).,12ASTM D 882-12 .,100 (4),.,250 (10).,.11 4,0,25 (0,010),1,0 (0,040),100 (4),250 (10).12 ,0,25 (0,010).7.7.1 23 2C(73,4 3,6F)50 10%,40 D618,ASTM .1C(1,8F)5%.7.2 23 2C(73,4 3,6F)50 10%,ASTM .1C(1,8F)5%.4 -ASTM International RR:D20-1058.13ASTM D 882-12 8.8.1 .8.2 ,.8.3():(1).(2),.(3).(4),(10 ).(5)-.8.4,-,.,(),.13 ,(),14ASTM D 882-12,.9.9.1 ()().5%.9.2 .1.:A=BC (1):A-,()/,B-,(),C-,/(/).1 /(/)/0,1 250 10 25 1,0 ()20 20 100 100 0,1 0,5 10,0 125 100 50 5 4 2 12,5 50 500 0,5 2,0 20,0 A.A3.1 .A3.2 A3,.9.3 .1,.14 ,;,15ASTM D 882-12 ,.9.4 ,.9.5 ,.10.10.1 ,.,.10.2 .0,25 (0,010).0,0025 (0,0001)0,25 (0,010)1%0,25 (0,010),1,0 (0,040).10.3 .1.10.4 ,.1,.-,().15 ,16ASTM D 882-12 .,.6.7.10.5 ,.,.,;.16 ,.,.;,.10.6 ,.,.10.7 .10.7.1 ,.10.7.2 ,-.17ASTM D 882-12 -,.10.7.3 ,.10.8 ,-30 60 X.,.,-.10.9 ,.10.10 ,.,(.A2).11.11.1 A1,-,.11.2 ().,18ASTM D 882-12 (),.0,0025 (0,0001).=1,75/(10,0/)0,1300 (0,0051).17 (0,13 (0,005),.,-,-,.,.11.3 ().,(.).,.18 -,-.11.4 (),(.18 19).19 ,.11.5 100.19ASTM D 882-12 ,;.(.18).11.6 ,.,(.),.,D 638.-%.11.7 ,100.,.1.,.11.8 -,.20ASTM D 882-12 1.,(.),.11.9 ().,.,.,1.3 .1.2 1,.,-.11.10 ,.A2,.,(-),.11.11 21ASTM D 882-12.11.12 ():(2):s-,X-,n-,X-.12.12.1 :12.1.1 ,(),12.1.2 ,12.1.3,12.1.4 ,12.1.5 ,12.1.6 ,12.1.7 (),12.1.8 (),12.1.9 ,(),12.1.10 (,),22ASTM D 882-12 12.1.11 ,12.1.12 ,12.1.13 (),12.1.14 (),12.1.15 ,12.1.16,12.1.17 ,:;,12.1.18 ,:-%-;-%-,12.1.19 (,),12.1.20,.13.13.1 .1977.,(0,025 (0,001)23ASTM D 882-12 .,(1%).,.2.2.,103 Sr 103 SR 103 lr 103 lR 103 LDPE HDPE PP PET 1,4 1,6 1,1 0,9 53,9 191 425 672 1,81 5,47 10,3 13,8 8,81 16,2 31,5 55,5 5,12 15,5 29,0 39,1 24,9 45,9 89,1 157,1 LDPE HOPE PP PET 1,4 1,6 1,1 0,9 45,0 150 372 640 2,11 3,29 4,66 10,0 3,43 9,58 26,5 27,5 5,98 9,30 13,2 28,4 9,70 27,1 74,9 77,8 13.1.1 .2 E691.5 13.1.2 Sx Sx :Sx=Sx/(5).Sx ,Sr ().13.3-13.3.2 .13.2 1981.,()0,019 0,178 (0,00075 0,007).5 -ASTM International RR:D20-1084.24ASTM D 882-12 .,Sx ,Sx=Sx/(5).,.3-7,:,(.20).6 20 -LDPE ,.3.,103(Sr)A 103 (SR)B 103 I(r)C 103 I(R)D 103 LDPE 1,0 1,49 0,0510,130,14 0,37HDPE 1,0 4,33 0,0840,160,24 0,44PP 0,75 6,40 0,130,520,37 1,46PC 4,0 8,59 0,0720,290,20 0,82CTA 5,3 11,4 0,120,500,34 1,43PET 4,0 14,3 0,120,230,34 0,66PET 2,5 14,4 0,140,540,40 1,52PET 7,0 14,4 0,130,360,37 1,03 A Sr B SR C Ir=2,83 Sr D IR=2,83 SR 13.3 ,.3.S(r)6 -ASTM International RR:D20-1101.25ASTM D 882-12 ,S(R),r 2,83 S(r)(.13.3.1),R 2,83 S(R)(.13.3.2).(Ir IR(13.3-13.3.3),.2 ,.,E691,.13.3-13.3.3 .)4.,%(Sr)A,%(SR)B,%l(r)C,%l(R)D,%PP 0,75 3,5 0,150,410,42 1,2PET 2,5 5,2 0,260,920,74 2,6PET 4,0 5,3 0,250,600,71 1,7PET 7,0 5,4 0,141,050,40 3,0CTA 5,3 5,4 0,190,990,54 2,8PC 4,0 6,9 0,240,980,68 2,8HDPE 1,0 8,8 0,321,820,91 5,2LDPE 1,0 10,0 0,553,411,56 9,6 1 .3.5.,103(Sr)A 103 (SR)B 103 I(r)C 103 I(R)D 103 LDPE 1,0 3,42 0,140,530,40 1,5HDPE 1,0 6,87 0,270,810,76 2