ASTM_D_6615_-_22.pdf

Designation:D661522Standard Specification forJet B Wide-Cut Aviation Turbine Fuel1This standard is issued under the fixed designation D6615;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope*1.1 This specification covers the use of purchasing agenciesin formulating specifications for purchases of aviation turbinefuel under contract.1.2 This specification defines one specific type of aviationturbine fuel for civil use.This fuel has advantages for opera-tions in very low temperature environments compared withother fuels described in Specification D1655.This fuel isintended for use in aircraft that are certified to use such fuel.1.3 This specification does not define the quality assurancetesting and procedures necessary to ensure that fuel in thedistribution system continues to comply with this specificationafter batch certification.Such procedures are definedelsewhere,for example in ICAO 9977,EI/JIG Standard 1530,JIG 1,JIG 2,API 1543,API 1595,and ATA-103.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D86 Test Method for Distillation of Petroleum Products andLiquid Fuels at Atmospheric PressureD130 Test Method for Corrosiveness to Copper from Petro-leum Products by Copper Strip TestD323 Test Method for Vapor Pressure of Petroleum Products(Reid Method)D381 Test Method for Gum Content in Fuels by Jet Evapo-rationD1094 Test Method for Water Reaction of Aviation FuelsD1266 Test Method for Sulfur in Petroleum Products(LampMethod)D1298 Test Method for Density,Relative Density,or APIGravity of Crude Petroleum and Liquid Petroleum Prod-ucts by Hydrometer MethodD1319 Test Method for Hydrocarbon Types in Liquid Petro-leum Products by Fluorescent Indicator AdsorptionD1322 Test Method for Smoke Point of Kerosene andAviation Turbine FuelD1655 Specification for Aviation Turbine FuelsD1660 Method of Test for Thermal Stability of AviationTurbine Fuels(Withdrawn 1992)3D1840 Test Method for Naphthalene Hydrocarbons in Avia-tion Turbine Fuels by Ultraviolet SpectrophotometryD2276 Test Method for Particulate Contaminant in AviationFuel by Line SamplingD2386 Test Method for Freezing Point of Aviation FuelsD2622 Test Method for Sulfur in Petroleum Products byWavelength Dispersive X-ray Fluorescence SpectrometryD2624 Test Methods for Electrical Conductivity of Aviationand Distillate FuelsD3227 Test Method for(Thiol Mercaptan)Sulfur inGasoline,Kerosine,Aviation Turbine,and Distillate Fuels(Potentiometric Method)D3240 Test Method for Undissolved Water In AviationTurbine FuelsD3241 Test Method for Thermal Oxidation Stability ofAviation Turbine FuelsD3338/D3338M Test Method for Estimation of Net Heat ofCombustion of Aviation FuelsD3948 Test Method for Determining Water Separation Char-acteristics ofAviation Turbine Fuels by Portable Separom-eterD4052 Test Method for Density,Relative Density,and APIGravity of Liquids by Digital Density MeterD4057 Practice for Manual Sampling of Petroleum andPetroleum ProductsD4171 Specification for Fuel System Icing InhibitorsD4175 Terminology Relating to Petroleum Products,LiquidFuels,and Lubricants1This specification is under the jurisdiction of ASTM Committee D02 onPetroleum Products,Liquid Fuels,and Lubricants and is the direct responsibility ofSubcommittee D02.J0.01 on Jet Fuel Specifications.Current edition approved July 1,2022.Published August 2022.Originallyapproved in 2000.Last previous edition approved in 2019 as D6615 15a(2019).DOI:10.1520/D6615-22.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1D4176 Test Method for Free Water and Particulate Contami-nation in Distillate Fuels(Visual Inspection Procedures)D4294 Test Method for Sulfur in Petroleum and PetroleumProducts by Energy Dispersive X-ray