ASTM_D_6595_-_17_rus.pdf

:D6595-17 -STANDARD TEST METHOD FOR DETERMINATION OF WEAR METALS AND CONTAMINANTS IN USED LUBRICATING OILS OR USED HYDRAULIC FLUIDS BY ROTATING DISC ELECTRODE ATOMIC EMISSION SPECTROMETRY 2018 ():19.11.2018:3573-18/ASTM -,.9,119049.:(499)236-54-49:(499)230-13-72 E-mail:interstgost.ru http:/www.interstandart.ru/(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International ,ASTM International.-,ASTM International ,.This translation is executed by FBU“CIC“Interstandard”of Federal Agency on Technical Regulating and Metrology under the license of American Society for Testing and Materials(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International does not approve and does not confirm these translations and in any cases only the English version published with a sign of ASTM International copyright can be considered as the original version.Reproduction of the specified translations by any Party,except for ASTM International or FBU“CIC“Interstandard”,is strictly forbidden according to the USA legislation and international copyright.ASTM D6595-17 1 :D6595-17 -1 D6595;,.().1.*1.1 -(RDE-AES).1.2 ,.1 ASTM D02 ,D02.03 .1 2017.2017.2000.2016.D6595-16.DOI:10.1520/D6595-17.ASTM D6595-17 2 1.3 ;.,.1.4 ,10.1.5,.1.5.1 /(ppm).1.6 ,.,.1.7 -,(TBT).ASTM D6595-17 3 2.2.1 ASTM:2 D4057 D4177 3.3.1:3.1.1 ,.3.1.2 ,.3.1.3 (),.3.1.4 ,().3.1.5 ,.3.2 :3.2.1 ,.2 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM.ASTM D6595-17 4 3.2.2 ,.3.2.3 ,.3.2.4 -,.3.2.5 ,/.3.2.6 ,/.3.2.7 .3.2.8 .3.2.9 ,.3.2.10 ,.4.4.1 ASTM D6595-17 5 ,.,.,.,.5.5.1 ,.,.,.6.6.1 .,ASTM D6595-17 6 .,.,.6.2 .,486,10 .,.6.3 10 ,.,.7.7.1 ,.160 .,.7.2-ASTM D6595-17 7,.1.,.1.,308,21 341,48 230,48,455,40 255,32,214,91 249,67 766,49 393,37,445,48 251,60 425,43 328,07,243,78 324,75,224,26 588,89,589,59 259,94 317,51 283,31 334,94 670,78 400,87 403,07,294,92 290,88,437,92 280,20,518,36 213,86 281,60 7.3 (),.,48 .8.8.1 ,75 ,.8.2 ,ASTM D6595-17 8 ,10%.8.3 ,;.8.4 ,().1.8.5 ,.1 ;().1 8.6 ,.100/900/.8.6.1 ASTM D6595-17 9 .8.7 .().2.11 ;().2 8.8 .,.,.8.9 ,.QC ,13.ASTM D6595-17 10 9.9.1 .D4057 D4177.10.10.1 ,.10.2 ,.60C,2.10.3 1.,.10.4 ,.11.11.1 ,ASTM D6595-17 11,.11.2 ,.,10C.11.3 .,.,10%.12.12.1 .,.,.1.12.2 ,.ASTM D6595-17 12 13.13.1 ,.,.,.13.2 ,.,.,.13.3 ,25 .,10%.14.14.1 /10/10/.ASTM D6595-17 13.2.1 X=/,/,/0,23-101 0,5419(X+0,57)0,45 28-115 0,0694X1,18 0,14-120 0,4280(X+0,1028)0,56 3,7-11460 0,1106(X+2,184)0,18-152 0,7285(X+0,0557)0,41 0,47-100 0,1631(X+0,3459)0,85 4,8-210 0,3159(X+0,0141)0,73 0,43-101 1,062(X+0,6015)0,34 4,9-1360 0,1049X 0,3-117 0,7017(X+0,3534)0,34 0,21-100 0,9978(X+0,4795)0,34 0,35-100 0,7142(X+0,3238)0,40 52-2572 0,0761(X+14,76)0,35-247 0,4075(X+0,1154)0,63 3,2-142 0,4015(X+0,1692)0,63 31-102 0,1523(X+1,2)0,88 3,6-99,6 0,1231(X-2,674)30-139 0,6777(X+0,6578)0,45 6,8-103 0,5831(X+0,9304)0,5 2,1-101 0,6389(X+0,8418)0,41 5,3-1345 0,2031(X+1,553)0,87 15.15.1 ,.16,14 ,.,:,ASTM D6595-17 14 ,.,.3 3.,/1 10 100 1000 0,7 1,6 4,3 16,2 0,5 1,6 5,6 1,3 11,3 110,8 0,7 1,9 4,8 0,2 1,2 8,2 1,7 9,3 1,2 2,4 5,1 1,0 10,5 104,9 0,8 1,6 3,4 1,1 2,2 4,8 0,8 1,8 4,5 1,9 8,7 0,4 1,8 7,4 1,7 7,3 8,9 0,9 12,0 5,4 1,7 4,2 1,7 4,2 1,7 11,3 82,9 15.1.1 ,3 -ASTM International RR:D02-1487.ASTM Customer Service serviceastm.org.ASTM D6595-17 15 ,.2 3,.15.1.2 ,.4 5,.4.1 X=/,/,/0,25-100 1,457(X+0,57)0,45 28-115 0,1317X1,18 0,14-120 0,9726(X+0,1028)0,56 3,7-11460 0,2951(X+2,184)0,18-152 1,232(X+0,0557)0,41 0,47-100 0,4386(X+0,3459)0,85 4,8-210 0,8323(X+0,0141)0,73 0,43-101 1,814(X+0,6015)0,34 4,9-1360 0,3535X 0,3-117 2,272(X+0,3534)0,34 0,21-100 2,089(X+0,4795)0,34 0,35-100 1,261(X+0,3238)0,40 52-2572 0,3016(X+14,76)0,35-247 1,023(X+0,1154)0,63 3,2-142 0,8796(X+0,1692)0,63 31-102 0,4439(X+1,2)0,88 3,6-99,6 0,1075(X+26,36)30-139 0,7967(X+0,6578)0,45 6,8-103 0,9682(X+0,9304)0,5 2,1-101 1,983(X+0,8418)0,41 5,3-1345 0,5881(X+1,553)0,87 15.2 ,30/,50/100/.,30/,ASTM D6595-17 16 50/100/.16.16.1 ;5.,/1 10 100 1000 1,8 4,2 11,6 30,7 1,0 3,6 12,8 3,6 30,2 295,7 1,3 3,2 8,1 0,6 3,2 22,0 4,4 24,5 2,1 4,0 8,7 3,5 35,4 353,5 2,5 5,0 10,9 2,4 4,6 10,0 131,3 1,4 3,2 8,0 7,5 34,6 1,1 4,4 18,6 3,8 16,0 25,8 3,9 13,6 6,3 3,2 9,7 5,3 13,1 4,9 32,8 240 ASTM D6595-17 17 D02.03 (D6595-16),.(1 2017.)(1).3,.4 .5.D02.03 (D6595-00(2011),.(1 2016.)(1)D4177 ,9.1,.(2),8.9.ASTM D6595-17 18 ASTM International -,.,.,.-ASTM International.,.,.ASTM International,100 Barr Harbor Drive,West Conshohocken,PA 19428-2959,United States.610-832-9585,610-832-9555 E-mail:serviceastm.org ASTM:(www.astm.org).,222 Rosewood Drive,Danvers,MA 01923,Tel:(978)646-2600;http:/.