ASTM_D_7264_-_D_7264M_-_15_rus.pdf

D7264/D7264M15 STANDARD TEST METHOD FOR FLEXURAL PROPERTIES OF POLYMER MATRIX COMPOSITE MATERIALS 2019 ():04.07.2019:3708-19/ASTM -,.9,119049.:(499)236-54-49:(499)230-13-72 E-mail:interstgost.ru http:/www.interstandart.ru/(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International ,ASTM International.-,ASTM International ,.This translation is executed by FBU“CIC“Interstandard”of Federal Agency on Technical Regulating and Metrology under the license of American Society for Testing and Materials(ASTM International)100 rr Harbor Drive,West Conshohocken,PA 19428,USA.ASTM International does not approve and does not confirm these translations and in any cases only the English version published with a sign of ASTM International copyright can be considered as the original version.Reproduction of the specified translations by any Party,except for ASTM International or FBU“CIC“Interstandard”,is strictly forbidden according to the USA legislation and international copyright.ASTM D7264/D7264M-15 1 D7264/D7264M15 1 D7264/D7264M;,.()1.1.1 .1.1.1 A .1.1.2 B ,.1 D6272,1 ASTM D30 D30.04 .1 2015.2015.2006.2007.D7264/D7264M-07.DOI:10.1520/D7264_D7264M-15.ASTM D7264/D7264M-15 2 ,.1.2 ,.1.3,-,.-.,.1.4 ,.,.2.2.1 ASTM:2 D790 D2344/D2344M ,D3878 2 ASTM,ASTM www.astm.org ASTM serviceastm.org.ASTM.Document Summary ASTM.ASTM D7264/D7264M-15 3 D5229/D5229M D5687/D5687M D6272 D6856 ,E4 E6 E18 E122 E177 ASTM E456 E1309 E1434 2.2 :ANSI Y14.5-1999 ()3 3 (ANSI),:25 W.43-.,4-,.-,.-10036,http:/www.ansi.org.ASTM D7264/D7264M-15 4 ANSI B46.1-1995 (,)3 3.3.1 D3878 ,.E6 ,.E456 E177 ,.,D3878 .3.2 :3.2.1 ,.3.2.2 ,.3.3 :b-CV-,%Efchord-Efsecant-h-L-m-n-P-sn-1-xi-ASTM D7264/D7264M-15 5 -4.4.1 ,:4.1.1 A (.1).4.1.2 B (),.(.)(.2).4.2,-,.1.A ASTM D7264/D7264M-15 6 .2.B 4.3 .,.,.,.4.4 ,D2344/D2344M.5.5.1 (,)ASTM D7264/D7264M-15 7 .,B .,32:1,16:1,D790(,)D6272(,).5.2 ,D2344/D2344M.5.3 ,.5.4 ,.5.5 .6.6.1 ,();,.,ASTM D7264/D7264M-15 8 ().,.6.2 ,.6.3 13 ,.,45.6.4 ,.,.,14.,.,;.ASTM D7264/D7264M-15 9 7.7.1 ,;1%.1%.E4.7.2 55 .5,0 1,0 0,197 0,004,.3,.,.,.7.3 47 0,160,28 ,.1%.0,02 0,001 ,0,1 0,004.ASTM D7264/D7264M-15 10 .3.()B()7.4 ,1%.7.5 /,1C 2F 3%,D5229/D5229M.,.R =5,0 0,1 0,197 0,004 R =5,0 0,1 0,197 0,004 ASTM D7264/D7264M-15 11 7.6 ,.3C 5F 5%.8.8.1 D5687/D5687M ,.8.2 ,.,(.2 3).32:1,4 0,16,13 0,5 20%.4 5 ,-.,D6856.,32:1 .:16:1,20:1,40:1 60:1,.,ASTM D7264/D7264M-15 12 .1 ANSI Y14.5-1999 ANSI B46.1-1995.2 .8.2 11.3 .4.()8.2.1 .2 ,32:1,8,.3 ,.2 ASTM D7264/D7264M-15 13 9.9.1 ,.,E122.10.10.1 ,D5229/D5229M;,.4 ,D5229/D5229M,.10.2 ,.10.3 ,.11.11.1 ,.ASTM D7264/D7264M-15 14 11.2 ,.11.3 0,1 0,004 63 2,5 0,3 0,012 ,63 2,5 .A1.11.4 1,0/0,05/.,D790 A D6272 B.11.5 ,.A .B .,.,.A1 .11.6 .,-50.(ASTM D7264/D7264M-15 15 -).,;.,.1 ANSI Y14.5-1999 ANSI B46.1-1995.2 .8.2 11.3 .5.(-)11.7 ,.,.2 ASTM D7264/D7264M-15 16 .11.7.1 ,.,.6.M.12.12.1 ,.,.,.(50%),()().13.5 -,(.A2).,.ASTM D7264/D7264M-15 17 13.1 ,A ,.-(6):(1):-,.,P-,-;L-,;b-,;h-,.6 1 ,.,.,2%,.,.4 .,1 ,.4 .Whitney,J.M.,Browning,C.E.,Mair,A.,(Analysis of the Flexure Test for Laminated Composite Materials),:(3-),ASTM STP 546,1974.,.30-45.ASTM D7264/D7264M-15 18 13.2 ,B ,1/2 ,(.2).-(7):(2):-,.;P-,-;L-,;b-,;h-,.7 ,.1 6,.2.T A T B S L S L R M(xyz)U M O V U .6.ASTM D7264/D7264M-15 19 13.3 ,(,.6).1 2,P .13.4 1 2,P ,-,(,.6).13.5-13.6.13.5 ,A :(3):-,/;-,;L-,;h-,.13.6 ,B :(4):-,;ASTM D7264/D7264M-15 20 -,/;L-,;h-,.13.7 :13.7.1 .0,002 0,001 0,003.(),.-5(,.8).(5):Efchord-,.;-,.;-(0,002).13.7.1.1 .0,001 0,003.,.8 ASTM D7264/D7264M-15 21 .5 .13.7.2 -.,.MPa .(,.8):13.7.2.1 A:(6):Efsecant-,.;L-,;b-,;h-,;m-.13.7.2.2 B:(7)Efsecant,m,L,b h ,6.5 .Zweben C.,Smith,W.S.Wardle,M.W.,(Test Methods for Fiber Tensile Strength,Composite Flexural Modulus,and Properties of Fabric-Reinforced Laminates),:(5-),ASTM STP 674,1979.,.228-262.ASTM D7264/D7264M-15 22 13.7.3 ,.,.13.8 ,:(8):-;xi-;n-;sn-1-;CV-.14.14.1,.E1309 E1434.:14.1.1 ;14.1.2 .14.1.3 .14.1.4 (A B).ASTM D7264/D7264M-15 23 14.1.5 ,.14.1.6 ,:,(),.14.1.7 ,:,.14.1.8 .14.1.9 ,.14.1.10 .14.1.11 .14.1.12 ,.14.1.13 .14.1.14 ,.ASTM D7264/D7264M-15 24 14.1.15 ,.14.1.16 ,.14.1.17 .14.1.18 ().14.1.19 .14.1.20 ,.14.1.21 .14.1.22 .14.1.23 ,.14.1.24 -.,-.14.1.25 .14.1.26 ,().,.14.1.27 ,().ASTM D7264/D7264M-15 25 14.1.28 ,.14.1.29 ,().14.1.30 ,(),.14.1.31 (.),().14.1.32 ,().,.14.1.33 :,(Ef).14.1.34 ,().,2%.14.1.35 .15.15.1 ,.ASTM D7264/D7264M-15 26 15.2 -.16.16.1 ,;()A1.A1.1 ,.,.A1.2 :A1.2.1 ,.A1.2.2 ,.,(.A1.1 A1.2).A1.2.3 ,0,1 0,004,ASTM D7264/D7264M-15 27 .A1.3 ,.,.A1.3.A1.1.A1.2.A1.3.A2.A2.1 -(.A2.1),AC,.,.,L ASTM D7264/D7264M-15 28 .A2.2 ,()(.A2.1),(CD).(B),.CD()(B,).A2.3 ,(.A2.2),H.B-.B ,(G)(BG).ASTM D7264/D7264M-15 29 .A2.1.A2.2.ASTM D7264/D7264M-15 30 ASTM International -,.,.,.-ASTM International.,.,.ASTM International,100 Barr Harbor Drive,West Conshohocken,PA 19428.610-832-9585,610-832-9555 E-mail:serviceastm.org ASTM:(www.astm.org).,222 Rosewood Drive,Danvers,MA 01923,Tel:(978)646-2600;http:/.