BPVC_2015_Section_II_-_Materials_-_Part_D_Metric.pdf

SECTION IIMATERIALSPart DProperties(Metric)ASME BPVC.II.D.M-20152015ASME Boiler andPressure Vessel CodeAn International CodeCopyrighted material licensed to University of Toronto by Thomson Scientific,Inc.().This copy downloaded on 2015-07-13 07:14:10-0500 by authorized user logan ahlstrom.No further reproduction or distribution is permitted.IIMATERIALSPart DProperties(Metric)ASME Boiler and Pressure Vessel Committeeon MaterialsAN INTERNATIONAL CODE2015 ASME Boiler&Pressure Vessel Code2015 EditionJuly 1,2015Two Park Avenue New York,NY 10016 USACopyrighted material licensed to University of Toronto by Thomson Scientific,Inc.().This copy downloaded on 2015-07-13 07:14:10-0500 by authorized user logan ahlstrom.No further reproduction or distribution is permitted.Date of Issuance:July 1,2015This international code or standard was developed under procedures accredited as meeting the criteria forAmerican National Standards and it is an American National Standard.The Standards Committee that approvedthe code or standard was balanced to assure that individuals from competent and concerned interests havehad an opportunity to participate.The proposed code or standard was made available for public review and com-ment that provides an opportunity for additional public input from industry,academia,regulatory agencies,andthe public-at-large.ASME does not“approve,”“rate,”or“endorse”any item,construction,proprietary device,or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with anyitems mentioned in this document,and does not undertake to insure anyone utilizing a standard against liabilityfor infringement of any applicable letters patent,nor assume any such liability.Users of a code or standard areexpressly advised that determination of the validity of any such patent rights,and the risk of infringement of suchrights,is entirely their own responsibility.Participation by federal agency representative(s)or person(s)affiliated with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the es-tablished ASME procedures and policies,which precludes the issuance of interpretations by individuals.The endnotes and preamble in this document(if any)are part of this American National Standard.ASME collective membership markCertification MarkThe above ASME symbol is registered in the U.S.Patent Office.“ASME”is the trademark of The American Society of Mechanical Engineers.No part of this document may be reproduced in any form,in an electronicretrieval system or otherwise,without the prior written permission of thepublisher.Library of Congress Catalog Card Number:56-3934Printed in the United States of AmericaAdopted by the Council of The American Society of Mechanical Engineers,1914;latest edition 2015.The American Society of Mechanical EngineersTwo Park Avenue,New York,NY 10016-5990Copyright 2015 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedCopyrighted material licensed to University of Toronto by Thomson Scientific,Inc.().This copy downloaded on 2015-07-13 07:14:10-0500 by authorized user logan ahlstrom.No further reproduction or distribution is permitted.TABLE OF CONTENTSList of Sections.xForeword.xiiStatement of Policy on the Use of the Certification Mark and Code Authorization in Advertising.xivStatement of Policy on the Use of ASME Marking to Identify Manufactured Items.xivSubmittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees.xvPersonnel.xviiSummary of Changes.xxxivList of Changes in Record Number Order.xlviCross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code.xlviiSubpart 1Stress Tables.1Statement of Policy on Information Provided in the Stress Tables.1Guideline on Locating Materials in Stress Tables,and in Tables of Mechanicaland Physical Properties.2Subpart 2Physical Properties Tables.752Introduction.752Subpart 3Charts and Tables for Determining Shell Thickness of Components Un-der External Pressure.793Mandatory Appendix 1Basis for Establishing Stress Values in Tables 1A and 1B.928Mandatory Appendix 2Basis for Establishing Design Stress Intensity Values for Tables 2A,2B,and 4,and Allowable Stress Values for Table 3.930Mandatory Appendix 3Basis for Establishing External Pressure Charts.933Mandatory Appendix 5Guidelines on the Approval ofNew Materials Under theASME Boiler andPressure Vessel Code.940Mandatory Appendix 7Guidelines on Multiple Marking of Materials.948Mandatory Appendix 9Standard Units for Use in Equations.950Mandatory Appendix 10Basis for Establishing Maximum Allowable Stress Values for Tables 5Aand 5B.951Nonmandatory Appendix AIssues Associated With Materials Used in ASME Code Construction.953Nonmandatory Appendix BDeveloping Nominal Composition Designations for ASME CodeMaterials.973Nonmandatory Appendix CGuidance for the Use of U