ASME_A112.19.1M-1999.pdf

000yhtedENAMELED CAST IRON PLUMBING FIXTURESASME A112.19.1M-1994materialNote(1)31 in.to 7 in.Note(1)(88.90mmtolicensed177.80mm)2 in.Note(2)50.80mm)Note(2)min.Stanfordy USizes,in.(mm)Sizes,in.(mm)LWWThomson19(482.60)17(431.80)19482.60117431.80)200r21508.00or533.40)18(457.2022(558.80119(482.6022(558.80119(482.60)24(609.60)18(457.20)ientifiNOTES:NOTES:(1)Supply openings and outlet are as shown in Fig.19,Details(1)Supply openings and outlet are as shown in Fig.19,DetailsA.B,and C.A.B,and C.(2)When provided,location of overflow is optional(see para.(www.tech(2)When provided,location of overflow is optional(see para.5.2.13.5.2.131.streetFIG.9 STRAIGHT-FRONT APRON LAVATO-FIG.10 SHELF-BACK LAVATORIES WITH8RIES WITH STRAIGHT BACKAPRON(Ref.para.5.2.1)(Ref.para.5.2.2)aded8Note(1)05-20100Note(2)-StanfordNote(1)Note(2)UniversityNote(3)User.Sizes,in.(mm)Sizes,in.(mm)LWLfurther20508.00)18(457.20)20(508.0018(4572024609.60)200r21(508.00or533.40)NOTES:NOTES:(1)When provided,location of overflow is optional(see para.roducti(1)Supply openings and outlet are as shown in Fig.19,Details5.2.13.A,B,and C.(2)Corner radius 1%in.+0-%in.(38.10 mm+0-3.18 mm).(2)When provided.location of overflow is optional(see para.(3)Supply openings and outlet are as shown in Fig.19,Details5.2.13.A.B,and C.F1G.11SLAB TYPE LAVATORIESFIG.12 RECTANGULAR FLAT-RIM(Ref.para.5.2.3)LAVATORIESdistribution is(Ref.para.5.2.4)permiitted.UncontrolhtedASME A112.19.1M-1994ENAMELED CAST IRON PLUMBING FIXTURESDsedNote(1)StanfordNote(1)UnivNote(2)Note(2)Sizes,in.mmlDSizes,in.(mm)Thon18457.20Wnson19(482.6021533.40)19(482.60)NOTES:NOTES:(1)When provided,location of overflow is optional(see para.(1)When provided,location of overflow is optional(see para.Scientific5.2.13.5.2.13.(2)Supply openings and outlet are as shown in Fig.19,Details(2)Supply openings and outlet are as shown in Fig.19,DetailsA.B,and C.A.B,and C.FIG.13 ROUND FLAT-RIM LAVATORIESF1G.14RECTANGULAR SELF-RIMMING(Ref.para.5.2.5)LAVATORIES(Ref.para.5.2.6)3adedNote(1)8Note(1)05-20100StanfordUniveUserNote(2)Note(2)Sizes,in.(mm)Sizes,in.(mm)furtherD19(482.6019%(488.95)16%(412.75)NOTES:NOTES:roduction(1)Supply openings and outlet are as shown in Fig.19,Details(1)Supply openings and outlet are as shown in Fig.19,Details9A.B,and C.A.B,and C.(2)When provided,location of overflow is optional(see para.(2)When provided,location of overflow is optional(see para.distr5.2.13).5.2.13.FIG.15 ROUND SELF-RIMMING LAVATORIESFIG.16 OVAL FLAT-RIM LAVATORIES(Ref.para.5.2.7)(Ref.para.5.2.8)8permitted.Uncontrolled wASME A112.19.1M-1994ENAMELED CAST IRON PLUMBING FIXTUREScets and combination fittings are shown in Fig.19,30in.21in.(609.60mmto762.00mm533.40Detail Bmm).(See Fig.28.)sed5.2.12 Lavatory Outlet Dimensions.The di-5.3.10 Tile-Edge Double Compartment Kitchen6mensional limits for outlets of lavatories with over-Sinks.Size is32in.21in.(812.80mm533.40Starflow are shown in Fig.19,Detail C.mm).(See Fig.29.)5.2.13 Lavatory Overflows.The provision of5.3.11 Tile-Edge Triple Compartment Kitchenan overflow and its location shall be at the option ofSinks.Sizes are 40 to 44 in.x 21 in.(1016.00 tothe manufacturer.If an overflow is provided,it shall1117.60mm533.40mm).(See Fig.30.)meet the following requirements:5.3.12 Kitchen Sink Outlet Dimensions.Theg(a)its minimum net cross-sectional area at any pointdimensional limits for outlets of kitchen sinks areshall be 1/s in.(725.80 mm);orshown in Fig.31.(b)it shall be capable of preventing the lavatoryfrom overflowing for a minimum of 5 minutes when5.3.13 Corner Radius.The radius of the outsidetested in accordance with para.7.5.corners of rims of flat-rim ledge sinks designed forcountertop installations is noted on the drawings.5.3 Kitchen Sinks-Common Types and Sizes5.3.14 Tile Edge.The typical tile edge is shownin Figs.28-30.5.3.1 Flat-Rim Ledge Kitchen Sinks.Sizes are24in.21in.(609.60mm533.40mm)and30in.21in.(762.00mm533.40mm).(See Fig.5.4 Wash Sinks-Common Types and Sizes20.)5.4.1 Wall-Hanging Wash Sinks With Back,com5.3.2 Flat-Rim Ledge Kitchen Sinks,DoubleWith or Without Pedestals.Sizes are 4 ft x 188Compartment.Sizes are 32 in.x 20 or 21 in.in.(1219.20mm457.20mm),5ft18in.(1524.00(812.80mm508.00or533.40mm)and42in.mm457.20mm),and6ft18in.(1828.80mm21in.(1066.80mm533.40mm.(See Fig.21.)x 457.20 mm);height of back is 8 in.(203.20 mm).5.3.3 Flat-Rim Kitchen Sinks With Center Out-(See Fig.32.)9let.Sizes are24in.16in.(609.60mm406.405.4.2 Outlet Dimensions.For outlet dimen-8mm),24in.18in.(609.60mm457.20mm),30sions,see Fig.33.in.18in.(762.00mm457.20mm),24in.20in.(609.60mm508.00mm),and30in.20in.-2010(762.00mm508.00mm).(See Fig.22.)5.5 Service Sinks-Common Types and Sizes5.5.1 Roll-Rim Service Sinks With Back,on TrapStar5.3.4 Flat-Rim Double Compartment KitchenSinks.Size is32in.20in.(812.80mm508.00Standard.Common sizes are 22 in.x 18in.(558.80mm).(See Fig.23.)mm457.20mm)and24in.20in.(609.60mm508.00mm:depth is10to14in.(254.00to355.605.3.5 Self-Rimming Kitchen Sinks With Centermm);height of back is 8 to 12 in.(203.20 to 304.800 utlet.Sizes are24in.21in.(609.60mmmm).(See Fig.34.)533.40mm)and25in.22in.(635.00mm558.80User5.5.2 Outlet Dimensions.For outlet dimen-mm).(See Fig.24.)sions,see Fig.35.5.3.6 Self-Rimming Double CompartmentfurtherKitchen Sinks.Size is 32 or 33 in.x 22 in.(812.805.6 Sink and Laundry Tray Combinations-Com-or838.20mm558.80mm).(See Fig.25.)mon Types and Sizesreprod5.3.7 Self-Rimming Triple CompartmentKitchen Sinks.Size is 42 to 44 in.x 22in.(1066.805.6.1 Ledge Sink and Laundry Tray Combina-tions With Back.For installation over cabinets orto1117.60mm558.80mm).(See Fig.26.)on legs.Sink may be at right or left of tray.Size is5.3.8 Self-RimmingCornerKitchen42in.24or25in.(1066.80mm609.60or635.00distriSinks.Sizes are at manufacturers discretion.(Seemm).(See Fig.36.)Fig.27.)5.6.2 Flat-Rim Sink and Laundry Tray Combi-5.3.9 Tile-Edge Kitchen Sinks.Sinks are 24 tonations,Reversible.Sink compartment may be atper10mittedUncorntrolled